CBAM Default Values for Iron and steel
Dataset vintage 2026-10-20 · 221 Annex IV rows · 478 benchmark products / 1650 routes · 7365 country-level rows
Under the EU Carbon Border Adjustment Mechanism (Regulation (EU) 2023/956), importers of iron and steel goods must declare embedded emissions. When actual data is unavailable the Commission's published defaults apply: the highest default values of Annex IV (Implementing Regulation (EU) 2026/1740 correcting (EU) 2025/2621) and the production-route benchmarks (Implementing Regulation (EU) 2025/2620). All figures on this page are recomputed from our own structured copy of the official workbooks; see the full CBAM dataset and the sibling sectors: Cement · Aluminium · Fertilisers · Hydrogen.
Annex IV highest default values
| CN code | Goods | Highest default (tCO₂e/t) |
|---|---|---|
| 2601 12 00 | Agglomerated iron ores and concentrates (excl. roasted iron pyrites) | 1.61 |
| 7201 | Pig iron and spiegeleisen, in pigs, blocks or other primary forms | 7.92 |
| 7202 11 | Ferro-manganese, containing by weight > 2% of carbon | 1.69 |
| 7202 19 | Ferro-manganese, containing by weight <= 2% carbon | 5.59 |
| 7202 41 | Ferro-chromium, containing by weight > 4% of carbon | 2.35 |
| 7202 49 | Ferro-chromium, containing by weight <= 4% of carbon | 2.87 |
| 7202 60 00 | Ferro-nickel | 6.15 |
| 7203 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms | 4.2 |
| 7205 | Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) (C)/(F) | 7.9 |
| 7206 | Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) | — (upstream: see below) |
| 7206 10 00 | Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) (C) | 8.21 |
| 7206 90 00 | Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) (C) | 8.21 |
| 7207 | Semi-finished products of iron or non-alloy steel | — (upstream: see below) |
| 7207 11 11 | Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (C) | 8.23 |
| 7207 11 14 | Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) (C) | 8.23 |
| 7207 11 16 | Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) (C) | 8.23 |
| 7207 11 90 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged (C) | 8.21 |
| 7207 12 10 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting (C) | 8.23 |
| 7207 12 90 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged (C) | 8.21 |
| 7207 19 12 | Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting (C) | 8.23 |
| 7207 19 19 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged (C) | 8.21 |
| 7207 19 80 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) (C) | 8.23 |
| 7207 20 11 | Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (C) | 8.23 |
| 7207 20 15 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) (C) | 8.23 |
| 7207 20 17 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) (C) | 8.23 |
| 7207 20 19 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged (C) | 8.21 |
| 7207 20 32 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting (C) | 8.23 |
| 7207 20 39 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged (C) | 8.21 |
| 7207 20 52 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting (C) | 8.23 |
| 7207 20 59 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged (C) | 8.21 |
| 7207 20 80 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) (C) | 8.23 |
| 7208 | Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated (C) | 8.23 |
| 7209 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated (C) | 8.25 |
| 7210 | Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated (C) | 8.25 |
| 7211 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated | — (upstream: see below) |
| 7211 13 00 | Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" (C) | 8.23 |
| 7211 14 00 | Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") (C) | 8.23 |
| 7211 19 00 | Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") (C) | 8.23 |
| 7211 23 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon (C) | 8.25 |
| 7211 29 00 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon (C) | 8.25 |
| 7211 90 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated (C) | 8.25 |
| 7212 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated (C) | 8.25 |
| 7213 | Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils (C) | 8.23 |
| 7214 | Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) | — (upstream: see below) |
| 7214 10 00 | Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) (C) | 8.21 |
| 7214 20 00 | Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process (C) | 8.23 |
| 7214 30 00 | Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) (C) | 8.23 |
| 7214 91 | Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) (C) | 8.23 |
| 7214 99 | Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) (C) | 8.23 |
| 7215 | Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. (C) | 8.23 |
| 7216 | Angles, shapes and sections of iron or non-alloy steel, n.e.s. (C) | 8.23 |
| 7217 | Wire of iron or non-alloy steel, in coils (excl. bars and rods) | — (upstream: see below) |
| 7217 10 | Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) (C) | 8.23 |
| 7217 20 | Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) (C) | 8.23 |
| 7217 30 | Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) (C) | 8.23 |
| 7217 90 | Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) (C) | 8.23 |
| 7218 | Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel | — (upstream: see below) |
| 7218 10 00 | Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) | 8.63 |
| 7218 91 | Semi-finished products of stainless steel, of rectangular "other than square" cross-section | 8.67 |
| 7218 99 11 | Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting | 8.67 |
| 7218 99 19 | Semi-finished products of stainless steel, of square cross-section, forged | 8.63 |
| 7218 99 20 | Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting | 8.67 |
| 7218 99 80 | Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) | 8.63 |
| 7219 | Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" | — (upstream: see below) |
| 7219 11 00 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm | 8.67 |
| 7219 12 | Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm | 8.67 |
| 7219 13 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm | 8.67 |
| 7219 14 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm | 8.67 |
| 7219 21 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm | 8.67 |
| 7219 22 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm | 8.67 |
| 7219 23 00 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm | 8.67 |
| 7219 24 00 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm | 8.67 |
| 7219 31 00 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm | 8.69 |
| 7219 32 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm | 8.69 |
| 7219 33 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm | 8.69 |
| 7219 34 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm | 8.69 |
| 7219 35 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm | 8.69 |
| 7219 90 | Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked | 8.69 |
| 7220 | Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" | — (upstream: see below) |
| 7220 11 00 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm | 8.67 |
| 7220 12 00 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm | 8.67 |
| 7220 20 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" | 8.69 |
| 7220 90 | Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked | 8.69 |
| 7221 | Bars and rods of stainless steel, hot-rolled, in irregularly wound coils | 8.69 |
| 7222 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. | — (upstream: see below) |
| 7222 11 | Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section | 8.69 |
| 7222 19 | Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) | 8.69 |
| 7222 20 | Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished | 8.69 |
| 7222 30 | Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. | 8.63 |
| 7222 40 | Angles, shapes and sections of stainless steel, n.e.s. | 8.69 |
| 7223 | Wire of stainless steel, in coils (excl. bars and rods) | — (upstream: see below) |
| 7223 00 | Wire of stainless steel, in coils (excl. bars and rods) | 8.69 |
| 7224 | Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) | — (upstream: see below) |
| 7224 10 | Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) (F) | 9.96 |
| 7224 90 02 | Semi-finished products of tool steel (F) | 10 |
| 7224 90 03 | Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness (F) | 10 |
| 7224 90 05 | Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness (F) | 10 |
| 7224 90 07 | Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) (F) | 10 |
| 7224 90 14 | Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) (F) | 10 |
| 7224 90 18 | Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) (F) | 9.96 |
| 7224 90 31 | Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (F) | 10 |
| 7224 90 38 | Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) (F) | 10 |
| 7224 90 90 | Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) (F) | 9.96 |
| 7225 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" | — (upstream: see below) |
| 7225 11 00 | Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented (C) | 13.24 |
| 7225 19 10 | Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled (C) | 10 |
| 7225 19 90 | Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented (C) | 10.02 |
| 7225 30 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) (F) | 10 |
| 7225 40 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) (F) | 10 |
| 7225 50 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) (F) | 10.02 |
| 7225 91 00 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) (F) | 10.02 |
| 7225 92 00 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) (F) | 10.02 |
| 7225 99 00 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) (F) | 10.02 |
| 7226 | Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" | — (upstream: see below) |
| 7226 11 00 | Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented (C) | 13.24 |
| 7226 19 10 | Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled (C) | 10 |
| 7226 19 80 | Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented (C) | 10.02 |
| 7226 20 00 | Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" (F) | 10 |
| 7226 91 | Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) (F) | 10 |
| 7226 92 00 | Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) (F) | 10.02 |
| 7226 99 | Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) (F) | 10.02 |
| 7227 | Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils (C)/(F) | 10.02 |
| 7228 | Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel | — (upstream: see below) |
| 7228 10 20 | Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) (F) | 10.02 |
| 7228 10 50 | Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) (F) | 9.96 |
| 7228 10 90 | Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) (F) | 10.02 |
| 7228 20 | Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) (F) | 10.02 |
| 7228 30 | Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) (C)/(F) | 10.02 |
| 7228 40 | Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) (F) | 9.96 |
| 7228 50 | Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) (C)/(F) | 10.02 |
| 7228 60 | Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) (F) | 10.02 |
| 7228 70 | Angles, shapes and sections of alloy steel other than stainless, n.e.s. (F) | 10.02 |
| 7228 80 00 | Hollow drill bars and rods, of alloy or non-alloy steel (F) | 10.02 |
| 7229 | Wire of alloy steel other than stainless, in coils (excl. bars and rods) (C)/(F) | 10.02 |
| 7301 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel (C) | 8.25 |
| 7302 | Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails (C) | 8.21 |
| 7303 | Tubes, pipes and hollow profiles, of cast iron | — (upstream: see below) |
| 7303 00 | Tubes, pipes and hollow profiles, of cast iron | 7.89 |
| 7304 | Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) | — (upstream: see below) |
| 7304 11 00 | Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel | 8.63 |
| 7304 19 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) (C) | 8.21 |
| 7304 22 00 | Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas | 8.63 |
| 7304 23 00 | Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) (C) | 8.21 |
| 7304 24 00 | Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel | 8.63 |
| 7304 29 | Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) (C) | 8.21 |
| 7304 31 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) (C) | 8.21 |
| 7304 39 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) (C) | 8.21 |
| 7304 41 00 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) | 8.63 |
| 7304 49 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) | 8.63 |
| 7304 51 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) (F) | 7.86 |
| 7304 59 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) (C)/(F) | 7.86 |
| 7304 90 00 | Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) (C) | 8.21 |
| 7305 | Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" (C) | 8.25 |
| 7306 | Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) | — (upstream: see below) |
| 7306 11 00 | Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm | 8.69 |
| 7306 19 00 | Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) (C) | 8.25 |
| 7306 21 00 | Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm | 8.69 |
| 7306 29 00 | Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) (C) | 8.25 |
| 7306 30 12 | Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (C) | 8.25 |
| 7306 30 18 | Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) (C) | 8.23 |
| 7306 30 41 | Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc (C) | 8.25 |
| 7306 30 49 | Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) (C) | 8.25 |
| 7306 30 72 | Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) (C) | 8.25 |
| 7306 30 77 | Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") (C) | 8.25 |
| 7306 30 80 | Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") (C) | 8.25 |
| 7306 40 20 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) | 8.69 |
| 7306 40 80 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) | 8.67 |
| 7306 50 21 | Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (F) | 7.96 |
| 7306 50 29 | Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) (F) | 7.94 |
| 7306 50 80 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) (F) | 7.96 |
| 7306 61 10 | Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel | 8.69 |
| 7306 61 92 | Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm (C) | 8.25 |
| 7306 61 99 | Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm (C) | 8.25 |
| 7306 69 10 | Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) | 8.69 |
| 7306 69 90 | Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) (C) | 8.25 |
| 7306 90 00 | Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) (C) | 8.25 |
| 7307 | Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel | — (upstream: see below) |
| 7307 11 | Tube or pipe fittings of non-malleable cast iron | 7.89 |
| 7307 19 10 | Tube or pipe fittings of cast iron (excl. of non-malleable) | 7.89 |
| 7307 19 90 | Cast tube or pipe fittings of steel (C) | 8.21 |
| 7307 21 00 | Flanges of stainless steel (excl. cast products) | 7.94 |
| 7307 22 | Threaded elbows, bends and sleeves of stainless steel (excl. cast products) | 7.94 |
| 7307 23 | Butt welding tube or pipe fittings of stainless steel (excl. cast products) | 7.94 |
| 7307 29 | Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) | 7.94 |
| 7307 91 00 | Flanges of iron or steel (excl. cast or stainless products) (C) | 8.21 |
| 7307 92 | Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) (C) | 8.21 |
| 7307 93 | Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) (C) | 8.21 |
| 7307 99 | Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) (C) | 8.21 |
| 7308 | Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) (C) | 8.25 |
| 7309 | Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) (C) | 10.01 |
| 7310 | Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. (C) | 8.25 |
| 7311 | Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) | — (upstream: see below) |
| 7311 00 | Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) (C) | 9.98 |
| 7318 | Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) | — (upstream: see below) |
| 7318 11 00 | Coach screws of iron or steel (C) | 8.23 |
| 7318 12 10 | Wood screws of stainless steel (excl. coach screws) | 8.65 |
| 7318 12 90 | Wood screws of iron or steel other than stainless (excl. coach screws) (C) | 8.23 |
| 7318 13 00 | Screw hooks and screw rings, of iron or steel (C) | 8.23 |
| 7318 14 10 | Self-tapping screws, of stainless steel (excl. wood screws) | 8.65 |
| 7318 14 91 | Spaced-thread screws of iron or steel other than stainless (C) | 8.23 |
| 7318 14 99 | Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) (C) | 8.23 |
| 7318 15 | Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) (C) | 8.23 |
| 7318 16 | Nuts of iron or steel (C) | 8.54 |
| 7318 19 00 | Threaded articles, of iron or steel, n.e.s. (C) | 8.23 |
| 7318 21 00 | Spring washers and other lock washers, of iron or steel (C) | 8.23 |
| 7318 22 00 | Washers of iron or steel (excl. spring washers and other lock washers) (C) | 8.54 |
| 7318 23 00 | Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) (C) | 8.23 |
| 7318 24 00 | Cotters and cotter pins, of iron or steel (C) | 8.23 |
| 7318 29 00 | Non-threaded articles, of iron or steel (C) | 8.23 |
| 7326 | Articles of iron or steel, n.e.s. (excl. cast articles) | — (upstream: see below) |
| 7326 11 00 | Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked (C) | 8.21 |
| 7326 19 | Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) (C) | 8.21 |
| 7326 20 00 | Articles of iron or steel wire, n.e.s. (C) | 8.23 |
| 7326 90 30 | Ladders and steps, of iron or steel (C) | 8.23 |
| 7326 90 40 | Pallets and similar platforms for handling goods, of iron or steel (C) | 8.23 |
| 7326 90 50 | Reels for cables, piping and the like, of iron or steel (C) | 8.23 |
| 7326 90 60 | Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel (C) | 8.23 |
| 7326 90 92 | Articles of iron or steel, open-die forged, n.e.s. (C) | 8.21 |
| 7326 90 94 | Articles of iron or steel, closed-die forged, n.e.s. (C) | 8.21 |
| 7326 90 96 | Sintered articles of iron or steel, n.e.s. (C) | 8.21 |
| 7326 90 98 | Articles of iron or steel, n.e.s. (C) | 8.25 |
Production-route benchmarks
| CN8 | Product | Routes | Column A (tCO₂e/t) | Column B (tCO₂e/t) |
|---|---|---|---|---|
| 26011200 | Agglomerated iron ores and concentrates (excl. roasted iron pyrites) | 1 | 0.086 | 0.086 |
| 72011011 | Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight <= 0,5% phosphorus, >= 0,4% manganese and <= 1% silicon | 1 | 1.089 | 1.21 |
| 72011019 | Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight <= 0,5% phosphorus, >= 0,4% manganese and > 1% silicon | 1 | 1.089 | 1.21 |
| 72011030 | Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight <= 0,5% phosphorus, and >= 0,1% but < 0,4% manganese | 1 | 1.089 | 1.21 |
| 72011090 | Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight <= 0,5% phosphorus, and <= 0,1% manganese | 1 | 1.089 | 1.21 |
| 72012000 | Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight >= 0,5% phosphorus | 1 | 1.089 | 1.21 |
| 72015010 | Alloy pig iron in pigs, blocks or other primary forms, containing by weight >= 0,3% but <= 1% titanium and >= 0,5% but <= 1% vanadium | 1 | 1.089 | 1.21 |
| 72015090 | Alloy pig iron and spiegeleisen, in pigs, blocks or other primary forms (excl. alloy iron containing, by weight, >= 0,3% but <= 1% titanium and >= 0,5% but <= 1% vanadium) | 1 | 1.089 | 1.21 |
| 72021120 | Ferro-manganese, containing by weight > 2% carbon, with a granulometry <= 5 mm and a manganese content by weight > 65% | 2 | 1.277–1.361 | 1.277–1.361 |
| 72021180 | Ferro-manganese, containing by weight > 2% carbon (excl. ferro-manganese with a granulometry of <= 5 mm and containing by weight > 65% manganese) | 2 | 1.277–1.361 | 1.277–1.361 |
| 72021900 | Ferro-manganese, containing by weight <= 2% carbon | 2 | 1.277–1.361 | 1.277–1.361 |
| 72024110 | Ferro-chromium, containing by weight > 4% but <= 6% carbon | 2 | 1.106–1.142 | 1.106–1.142 |
| 72024190 | Ferro-chromium, containing by weight > 6% carbon | 2 | 1.106–1.142 | 1.106–1.142 |
| 72024910 | Ferro-chromium, containing by weight <= 0,05% carbon | 2 | 1.106–1.142 | 1.106–1.142 |
| 72024950 | Ferro-chromium, containing by weight > 0,05% but <= 0,5% carbon | 2 | 1.106–1.142 | 1.106–1.142 |
| 72024990 | Ferro-chromium, containing by weight > 0,5% but <= 4% carbon | 2 | 1.106–1.142 | 1.106–1.142 |
| 72026000 | Ferro-nickel | 2 | 2.295–2.39 | 2.295–2.39 |
| 72031000 | Ferrous products obtained by direct reduction of iron ore, in lumps, pellets or similar forms | 1 | 0.295 | 0.397 |
| 72039000 | Spongy ferrous products, obtained from molten pig iron by atomisation, iron of a purity of >= 99,94%, in lumps, pellets or similar forms | 1 | 0.295 | 0.397 |
| 72051000 | Granules, of pig iron, spiegeleisen, iron or steel (excl. granules of ferro-alloys, turnings and filings of iron or steel, certain small calibre items, defective balls for ball-bearings) | 3 | 0 | 0.027–1.288 |
| 72052100 | Powders, of alloy steel (excl. powders of ferro-alloys and radioactive iron powders "isotopes") | 8 | 0 | 0.315–1.46 |
| 72052900 | Powders, of pig iron, spiegeleisen, iron or non-alloy steel (excl. powders of ferro-alloys and radioactive iron powders "isotopes") | 3 | 0 | 0.027–1.288 |
| 72061000 | Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) | 3 | 0.027–0.15 | 0.027–1.288 |
| 72069000 | Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) | 3 | 0.027–0.15 | 0.027–1.288 |
| 72071111 | Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting | 3 | 0.065–0.188 | 0.066–1.364 |
| 72071114 | Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) | 3 | 0.065–0.188 | 0.066–1.364 |
| 72071116 | Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) | 3 | 0.065–0.188 | 0.066–1.364 |
| 72071190 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged | 3 | 0.33–0.453 | 0.331–1.629 |
| 72071210 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting | 3 | 0.065–0.188 | 0.066–1.364 |
| 72071290 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged | 3 | 0.33–0.453 | 0.331–1.629 |
| 72071912 | Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting | 3 | 0.065–0.188 | 0.066–1.364 |
| 72071919 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged | 3 | 0.33–0.453 | 0.331–1.629 |
| 72071980 | Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) | 3 | 0.065–0.188 | 0.066–1.364 |
| 72072011 | Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting | 3 | 0.065–0.188 | 0.066–1.364 |
| 72072015 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) | 3 | 0.065–0.188 | 0.066–1.364 |
| 72072017 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) | 3 | 0.065–0.188 | 0.066–1.364 |
| 72072019 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged | 3 | 0.33–0.453 | 0.331–1.629 |
| 72072032 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting | 3 | 0.065–0.188 | 0.066–1.364 |
| 72072039 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged | 3 | 0.33–0.453 | 0.331–1.629 |
| 72072052 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting | 3 | 0.065–0.188 | 0.066–1.364 |
| 72072059 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged | 3 | 0.33–0.453 | 0.331–1.629 |
| 72072080 | Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) | 3 | 0.065–0.188 | 0.066–1.364 |
| 72081000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process | 3 | 0.044 | 0.072–1.37 |
| 72082500 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm, pickled, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72082600 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, pickled, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72082700 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, pickled, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72083600 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 10 mm, not pickled, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72083700 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but < 10 mm, not pickled, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72083800 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, not pickled, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72083900 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, not pickled, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72084000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process | 3 | 0.044 | 0.072–1.37 |
| 72085120 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72085191 | Flat-rolled products of iron or non-alloy steel, of a width of >= 2.050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm, without patterns in relief (excl. "wide flats") | 3 | 0.044 | 0.072–1.37 |
| 72085198 | Flat-rolled products of iron or non-alloy steel, of a width of < 2.050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72085210 | Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72085291 | Flat-rolled products of iron or non-alloy steel, of a width of >= 2.050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72085299 | Flat-rolled products of iron or non-alloy steel, of a width of < 2.050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief (excl. rolled on four faces or in a closed bow pass of a width <= 1.250 mm) | 3 | 0.044 | 0.072–1.37 |
| 72085310 | Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4 mm but < 4,75 mm, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72085390 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, without patterns in relief (excl. rolled on four faces or in a closed bow pass of a width <= 1.250 mm and of a thickness of >= 4 mm) | 3 | 0.044 | 0.072–1.37 |
| 72085400 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, without patterns in relief | 3 | 0.044 | 0.072–1.37 |
| 72089020 | Flat-rolled products of iron or steel, of a width >= 600 mm, hot-rolled and further worked, but not clad, plated or coated, perforated | 3 | 0.044 | 0.072–1.37 |
| 72089080 | Flat-rolled products of iron or steel, of a width >= 600 mm, hot-rolled and further worked, but not clad, plated or coated, non-perforated | 3 | 0.044 | 0.072–1.37 |
| 72091500 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 3 mm | 3 | 0.079 | 0.108–1.458 |
| 72091610 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm "electrical" | 3 | 0.079 | 0.108–1.458 |
| 72091690 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm "electrical" | 3 | 0.079 | 0.108–1.458 |
| 72091710 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm "electrical" | 3 | 0.079 | 0.108–1.458 |
| 72091790 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 0,5 mm but <= 1 mm (excl. electrical) | 3 | 0.079 | 0.108–1.458 |
| 72091810 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", of a thickness of < 0,5 mm "electrical" | 3 | 0.079 | 0.108–1.458 |
| 72091891 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 0,35 mm but < 0,5 mm (excl. electrical) | 3 | 0.079 | 0.108–1.458 |
| 72091899 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of < 0,35 mm (excl. electrical) | 3 | 0.079 | 0.108–1.458 |
| 72092500 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 3 mm | 3 | 0.079 | 0.108–1.458 |
| 72092610 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm "electrical" | 3 | 0.079 | 0.108–1.458 |
| 72092690 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of > 1 mm but < 3 mm (excl. electrical) | 3 | 0.079 | 0.108–1.458 |
| 72092710 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm "electrical" | 3 | 0.079 | 0.108–1.458 |
| 72092790 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 0,5 mm but <= 1 mm (excl. electrical) | 3 | 0.079 | 0.108–1.458 |
| 72092810 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", of a thickness of < 0,5 mm "electrical" | 3 | 0.079 | 0.108–1.458 |
| 72092890 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of < 0,5 mm (excl. electrical) | 3 | 0.079 | 0.108–1.458 |
| 72099020 | Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced" and further worked, but not clad, plated or coated, perforated | 3 | 0.079 | 0.108–1.458 |
| 72099080 | Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced" and further worked, but not clad, plated or coated, non-perforated | 3 | 0.079 | 0.108–1.458 |
| 72101100 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, of a thickness of >= 0,5 mm | 3 | 0.112 | 0.141–1.491 |
| 72101220 | Tinplate of iron or non-alloy steel, of a width of >= 600 mm and of a thickness of < 0,5 mm, tinned [coated with a layer of metal containing, by weight, >= 97% of tin], not further worked than surface-treated | 3 | 0.112 | 0.141–1.491 |
| 72101280 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with tin, of a thickness of < 0,5 mm (excl. tinplate) | 3 | 0.112 | 0.141–1.491 |
| 72102000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with lead, incl. terne-plate | 3 | 0.112 | 0.141–1.491 |
| 72103000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc | 3 | 0.112 | 0.141–1.491 |
| 72104100 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", corrugated, plated or coated with zinc (excl. electrolytically plated or coated with zinc) | 3 | 0.112 | 0.141–1.491 |
| 72104900 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", not corrugated, plated or coated with zinc (excl. electrolytically plated or coated with zinc) | 3 | 0.112 | 0.141–1.491 |
| 72105000 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with chromium oxides or with chromium and chromium oxides | 3 | 0.112 | 0.141–1.491 |
| 72106100 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with aluminium-zinc alloys | 3 | 0.112 | 0.141–1.491 |
| 72106900 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with aluminium (excl. products plated or coated with aluminium-zinc alloys) | 3 | 0.112 | 0.141–1.491 |
| 72107010 | Tinplate of a width of >= 600 mm and of a thickness of < 0,5 mm, tinned [coated with a layer of metal containing, by weight, >= 97% of tin], not further worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", varnished | 3 | 0.112 | 0.141–1.491 |
| 72107080 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or plastic coated (excl. tinplate and products electrolytically plated or coated with chrome, varnished) | 3 | 0.112 | 0.141–1.491 |
| 72109030 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad | 3 | 0.112 | 0.141–1.491 |
| 72109040 | Flat-rolled products of iron or non-alloy steel, tinned and printed, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" | 3 | 0.112 | 0.141–1.491 |
| 72109080 | Flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled "cold-reduced", of a width of >= 600 mm, plated or coated (excl. plated or coated with thin, lead "incl. terne-plate", zinc, aluminium, chromium, chromium oxides, plastics, platinum, painted or varnished, clad and tinned and printed) | 3 | 0.112 | 0.141–1.491 |
| 72111300 | Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" | 3 | 0.044 | 0.072–1.37 |
| 72111400 | Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") | 3 | 0.044 | 0.072–1.37 |
| 72111900 | Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") | 3 | 0.044 | 0.072–1.37 |
| 72112320 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon "electrical" | 3 | 0.079 | 0.108–1.458 |
| 72112330 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm and of a thickness of >= 0,35 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon (excl. electrical plate) | 3 | 0.079 | 0.108–1.458 |
| 72112380 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm and of a thickness of < 0,35 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon (excl. electrical plate) | 3 | 0.079 | 0.108–1.458 |
| 72112900 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon | 3 | 0.079 | 0.108–1.458 |
| 72119020 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated, perforated | 3 | 0.079 | 0.108–1.458 |
| 72119080 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated non-perforated | 3 | 0.079 | 0.108–1.458 |
| 72121010 | Tinplate of iron or non-alloy steel, of a width of < 600 mm and of a thickness of < 0,5 mm, tinned [coated with a layer of metal containing, by weight, >= 97% of tin], not further worked than surface-treated | 3 | 0.112 | 0.141–1.491 |
| 72121090 | Flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled "cold-reduced", of a width of < 600 mm, tinned (excl. tinplate, not further worked than surface-treated) | 3 | 0.112 | 0.141–1.491 |
| 72122000 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc | 3 | 0.112 | 0.141–1.491 |
| 72123000 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned (excl. electrolytically plated or coated with zinc) | 3 | 0.112 | 0.141–1.491 |
| 72124020 | Tinplate of a width of < 600 mm and of a thickness of < 0,5 mm, tinned [coated with a layer of metal containing, by weight, >= 97% of tin], not further worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", varnished | 3 | 0.112 | 0.141–1.491 |
| 72124080 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or plastic coated (excl. tinplate, not further worked than varnished, and products plated or coated with chromium oxides or with chromium and chromium oxides, varnished) | 3 | 0.112 | 0.141–1.491 |
| 72125020 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with chromium oxides or with chromium and chromium oxides (excl. varnished) | 3 | 0.112 | 0.141–1.491 |
| 72125030 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with chromium or nickel | 3 | 0.112 | 0.141–1.491 |
| 72125040 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with copper | 3 | 0.112 | 0.141–1.491 |
| 72125061 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with aluminium-zinc alloys | 3 | 0.112 | 0.141–1.491 |
| 72125069 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with aluminium (excl. products plated or coated with aluminium-zinc alloys) | 3 | 0.112 | 0.141–1.491 |
| 72125090 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad (excl. products plated or coated with tin or zinc, copper, with chromium oxides or with chromium and chromium oxides, chromium, nickel or aluminium, painted or varnished, and plastic-coated) | 3 | 0.112 | 0.141–1.491 |
| 72126000 | Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad | 3 | 0.112 | 0.141–1.491 |
| 72131000 | Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process | 3 | 0.038 | 0.066–1.364 |
| 72132000 | Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) | 3 | 0.038 | 0.066–1.364 |
| 72139110 | Bars and rods, hot-rolled, of the type used for concrete reinforcement, smooth, of iron or non-alloy steel, in irregularly wound coils, of circular cross-section measuring < 14 mm in diameter | 3 | 0.038 | 0.066–1.364 |
| 72139120 | Bars and rods, hot-rolled, of the type used for tyre cord, smooth, of iron or non-alloy steel, in irregularly wound coils | 3 | 0.038 | 0.066–1.364 |
| 72139141 | Bars and rods, hot-rolled, of iron or non-alloy steel, in irregularly wound coils, containing by weight <= 0,06% of carbon, of circular cross-section measuring < 14 mm in diameter (excl. free-cutting steel, bars and rods, hot-rolled, for concrete reinforcement and tyre cord, and bars and rods, hot-rolled, containing indentations, ribs, grooves or other deformations produced during the rolling process) | 3 | 0.038 | 0.066–1.364 |
| 72139149 | Bars and rods, hot-rolled, of iron or non-alloy steel, in irregularly wound coils, containing by weight > 0,06% and < 0,25% of carbon, of circular cross-section, measuring < 14 mm in diameter (excl. of free-cutting steel, bars and rods, hot-rolled, for concrete reinforcement and tyre cord and bars and rods, hot-rolled, containing indentations, ribs, grooves or other deformations produced during the rolling process) | 3 | 0.038 | 0.066–1.364 |
| 72139170 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, containing by weight >= 0,25% but <= 0,75% carbon, of circular cross-section measuring < 14 mm in diameter (excl. of free-cutting steel, and bars and rods, smooth, for concrete reinforcement and tyre cord, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) | 3 | 0.038 | 0.066–1.364 |
| 72139190 | Bars and rods, hot-rolled, of iron or non-alloy steel, in irregularly wound coils, containing by weight > 0,75% of carbon, of circular cross-section measuring < 14 mm in diameter (excl. of free-cutting steel, bars and rods, smooth, for tyre cord and bars and rods with indentations, ribs, grooves and other deformations produced during the rolling process) | 3 | 0.038 | 0.066–1.364 |
| 72139910 | Bars and rods, of iron or non-alloy steel, hot-rolled, in irregularly wound coils, containing by weight < 0,25% carbon (excl. products of circular cross-section measuring < 14 mm in diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) | 3 | 0.038 | 0.066–1.364 |
| 72139990 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. products of circular cross-section measuring < 14 mm diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) | 3 | 0.038 | 0.066–1.364 |
| 72141000 | Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) | 3 | 0.303 | 0.331–1.629 |
| 72142000 | Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process | 3 | 0.038 | 0.066–1.364 |
| 72143000 | Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) | 3 | 0.038 | 0.066–1.364 |
| 72149110 | Bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) | 3 | 0.038 | 0.066–1.364 |
| 72149190 | Other bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% of carbon, of rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) | 3 | 0.038 | 0.066–1.364 |
| 72149910 | Bars and rods of the type used for concrete reinforcement, smooth, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing < 0,25% of carbon, of square cross-section or of a cross-section other than rectangular | 3 | 0.038 | 0.066–1.364 |
| 72149931 | Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section, of a maximum diameter of >= 80 mm (other than of free-cutting steel, smooth bars and rods, for reinfoced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) | 3 | 0.038 | 0.066–1.364 |
| 72149939 | Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section of a maximum diameter of < 80 mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) | 3 | 0.038 | 0.066–1.364 |
| 72149950 | Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of square cross-section or of a cross-section other than square or circular (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) | 3 | 0.038 | 0.066–1.364 |
| 72149971 | Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% carbon, of circular cross-section measuring >= 80 mm in diameter (excl. bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel) | 3 | 0.038 | 0.066–1.364 |
| 72149979 | Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% carbon, of circular cross-section measuring < 80 mm in diameter (excl. bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel) | 3 | 0.038 | 0.066–1.364 |
| 72149995 | Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% carbon, of square or of other than rectangular or circular cross-section (excl. indentations, ribs, grooves or other deformations produced during the rolling process, twisted fter rolling, and of free-cutting steel) | 3 | 0.038 | 0.066–1.364 |
| 72151000 | Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished | 3 | 0.038 | 0.066–1.364 |
| 72155011 | Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight < 0,25% of carbon of rectangular "other than square" cross-section (excl. those of free-cutting steel) | 3 | 0.038 | 0.066–1.364 |
| 72155019 | Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight < 0,25% of carbon, of square or other than rectangular cross-section (excl. those of free-cutting steel) | 3 | 0.038 | 0.066–1.364 |
| 72155080 | Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight >= 0,25% of carbon (excl. those of free-cutting steel) | 3 | 0.038 | 0.066–1.364 |
| 72159000 | Bars or rods, of iron or non-alloy steel, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. | 3 | 0.038 | 0.066–1.364 |
| 72161000 | U, I or H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm | 3 | 0.038 | 0.066–1.364 |
| 72162100 | L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm | 3 | 0.038 | 0.066–1.364 |
| 72162200 | T sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm | 3 | 0.038 | 0.066–1.364 |
| 72163110 | U sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220 mm | 3 | 0.038 | 0.066–1.364 |
| 72163190 | U sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm | 3 | 0.038 | 0.066–1.364 |
| 72163211 | I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220 mm | 3 | 0.038 | 0.066–1.364 |
| 72163219 | I sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220 mm (excl. 7216.32.11) | 3 | 0.038 | 0.066–1.364 |
| 72163291 | I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm | 3 | 0.038 | 0.066–1.364 |
| 72163299 | I sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm (excl. 7216.32.91) | 3 | 0.038 | 0.066–1.364 |
| 72163310 | H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 180 mm | 3 | 0.038 | 0.066–1.364 |
| 72163390 | H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 180 mm | 3 | 0.038 | 0.066–1.364 |
| 72164010 | L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of >= 80 mm | 3 | 0.038 | 0.066–1.364 |
| 72164090 | T sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of >= 80 mm | 3 | 0.038 | 0.066–1.364 |
| 72165010 | Sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, with a cross-section which is capable of being enclosed in a square the side of which is <= 80 mm (excl. U, I, H, L or T sections) | 3 | 0.038 | 0.066–1.364 |
| 72165091 | Bulb sections "bulb flat", only hot-rolled, hot-drawn or hot-extruded | 3 | 0.038 | 0.066–1.364 |
| 72165099 | Profile of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded (other than with a cross-section which is capable of being enclosed in a square the side of which is <= 80 mm, and U-, I-, H-, L- or T-sections and ribbed sections [ribbed steel]) | 3 | 0.038 | 0.066–1.364 |
| 72166110 | c, l, u, z, omega or open-ended sections of iron or non-alloy steel, simply cold-formed or cold-finished, obtained from flat-rolled products | 3 | 0.038 | 0.066–1.364 |
| 72166190 | Angles, shapes and sections (other than c, l, u, z, omega or open-ended sections) of iron or non-alloy steel, simply cold-formed or cold-finished, obtained from flat-rolled products | 3 | 0.038 | 0.066–1.364 |
| 72166900 | Angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. profiled sheet) | 3 | 0.038 | 0.066–1.364 |
| 72169110 | Sheets of iron or non-alloy steel, cold-formed or cold finished, profiled "ribbed" | 3 | 0.038 | 0.066–1.364 |
| 72169180 | Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished from flat-rolled products and further worked (excl. profiled sheet) | 3 | 0.038 | 0.066–1.364 |
| 72169900 | Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished and further worked, or hot-forged, or hot-formed by other means and further worked, n.e.s. (excl. from flat-rolled products) | 3 | 0.038 | 0.066–1.364 |
| 72171010 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, not plated or coated, whether or not polished, with a maximum cross-sectional dimension of < 0,8 mm | 3 | 0.038 | 0.066–1.364 |
| 72171031 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, with indentations, ribs, grooves or other deformations produced during the rolling process, not plated or coated, with a maximum cross-sectional dimension of >= 0,8 mm | 3 | 0.038 | 0.066–1.364 |
| 72171039 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, not plated or coated, with a maximum cross-sectional dimension of >= 0,8 mm (without indentations, ribs, grooves or other deformations produced during the rolling process) | 3 | 0.038 | 0.066–1.364 |
| 72171050 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,25% but < 0,6% carbon, not plated or coated, whether or not polished (excl. hot-rolled bars and rods) | 3 | 0.038 | 0.066–1.364 |
| 72171090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, not plated or coated, whether or not polished (excl. hot-rolled bars and rods) | 3 | 0.038 | 0.066–1.364 |
| 72172010 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, plated or coated with zinc, with a maximum cross-sectional dimension of < 0,8 mm | 3 | 0.071 | 0.099–1.397 |
| 72172030 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, plated or coated with zinc, with a maximum cross-sectional dimension of < 0,8 mm (excl. bars and rods) | 3 | 0.071 | 0.099–1.397 |
| 72172050 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,25% but < 0,6% carbon, plated or coated with zinc (excl. bars and rods) | 3 | 0.071 | 0.099–1.397 |
| 72172090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, plated or coated with zinc (excl. bars and rods) | 3 | 0.071 | 0.099–1.397 |
| 72173041 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, copper-coated (excl. bars and rods) | 3 | 0.071 | 0.099–1.397 |
| 72173049 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, plated or coated with base metals (excl. products plated or coated with zinc or copper and bars and rods) | 3 | 0.071 | 0.099–1.397 |
| 72173050 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,25% but < 0,6% carbon, plated or coated with base metals (excl. products plated or coated with zinc, and bars and rods) | 3 | 0.071 | 0.099–1.397 |
| 72173090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, plated or coated with base metals (excl. products plated or coated with zinc, and bars and rods) | 3 | 0.071 | 0.099–1.397 |
| 72179020 | Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, plated or coated (excl. products plated or coated with base metals and bars and rods) | 3 | 0.071 | 0.099–1.397 |
| 72179050 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,25% but < 0,6% carbon, plated or coated (excl. products plated or coated with with base metals, and bars and rods) | 3 | 0.071 | 0.099–1.397 |
| 72179090 | Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, plated or coated (excl. products plated or coated with base metals, and bars and rods) | 3 | 0.071 | 0.099–1.397 |
| 72181000 | Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) | 2 | 0.358 | 1.381–1.419 |
| 72189110 | Semi-finished products of stainless steel, of rectangular "other than square" cross-section, containing by weight >= 2,5% nickel | 2 | 0.128 | 1.151–1.189 |
| 72189180 | Semi-finished products of stainless steel, of rectangular "other than square" cross-section, containing by weight < 2,5 nickel | 2 | 0.128 | 1.151–1.189 |
| 72189911 | Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting | 2 | 0.128 | 1.151–1.189 |
| 72189919 | Semi-finished products of stainless steel, of square cross-section, forged | 2 | 0.358 | 1.381–1.419 |
| 72189920 | Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting | 2 | 0.128 | 1.151–1.189 |
| 72189980 | Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) | 2 | 0.358 | 1.381–1.419 |
| 72191100 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm | 2 | 0.073 | 1.151–1.189 |
| 72191210 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight >= 2,5 nickel | 2 | 0.073 | 1.151–1.189 |
| 72191290 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight < 2,5 nickel | 2 | 0.073 | 1.151–1.189 |
| 72191310 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight >= 2,5 nickel | 2 | 0.073 | 1.151–1.189 |
| 72191390 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight < 2,5 nickel | 2 | 0.073 | 1.151–1.189 |
| 72191410 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm, containing by weight >= 2,5 nickel | 2 | 0.073 | 1.151–1.189 |
| 72191490 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm, containing by weight < 2,5 nickel | 2 | 0.073 | 1.151–1.189 |
| 72192110 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm, containing by weight >= 2,5 nickel | 2 | 0.073 | 1.151–1.189 |
| 72192190 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm, containing by weight < 2,5 nickel | 2 | 0.073 | 1.151–1.189 |
| 72192210 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight >= 2,5% nickel | 2 | 0.073 | 1.151–1.189 |
| 72192290 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight < 2,5% nickel | 2 | 0.073 | 1.151–1.189 |
| 72192300 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm | 2 | 0.073 | 1.151–1.189 |
| 72192400 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm | 2 | 0.073 | 1.151–1.189 |
| 72193100 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm | 2 | 0.109 | 1.23–1.27 |
| 72193210 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but <= 4,75 mm, containing by weight >= 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72193290 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but <= 4,75 mm, containing by weight < 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72193310 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight >= 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72193390 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight < 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72193410 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm, containing by weight >= 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72193490 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm, containing by weight < 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72193510 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm, containing by weight >= 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72193590 | Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm, containing by weight < 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72199020 | Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, perforated | 2 | 0.109 | 1.23–1.27 |
| 72199080 | Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, non-perforated | 2 | 0.109 | 1.23–1.27 |
| 72201100 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm | 2 | 0.073 | 1.151–1.189 |
| 72201200 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm | 2 | 0.073 | 1.151–1.189 |
| 72202021 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm and containing by weight >= 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72202029 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm and containing by weight < 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72202041 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight >= 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72202049 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight < 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72202081 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of <= 0,35 mm and containing by weight >= 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72202089 | Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of <= 0,35 mm and containing by weight < 2,5% nickel | 2 | 0.109 | 1.23–1.27 |
| 72209020 | Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, perforated | 2 | 0.109 | 1.23–1.27 |
| 72209080 | Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, non-perforated | 2 | 0.109 | 1.23–1.27 |
| 72210010 | Bars and rods of stainless steel, hot-rolled, in irregularly wound coils, containing by weight >= 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72210090 | Bars and rods of stainless steel, hot-rolled, in irregularly wound coils, containing by weight < 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72221111 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight >= 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72221119 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight < 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72221181 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight >= 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72221189 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight < 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72221910 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight >= 2,5% nickel (excl. such products of circular cross-section) | 2 | 0.109 | 1.187–1.225 |
| 72221990 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight < 2,5% nickel (excl. such products of circular cross-section) | 2 | 0.109 | 1.187–1.225 |
| 72222011 | Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight >= 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72222019 | Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight < 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72222021 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight >= 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72222029 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight < 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72222031 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight >= 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72222039 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight < 2,5% nickel | 2 | 0.109 | 1.187–1.225 |
| 72222081 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight >= 2,5% nickel (excl. such products of circular cross-section) | 2 | 0.109 | 1.187–1.225 |
| 72222089 | Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight < 2,5% nickel (excl. such products of circular cross-section) | 2 | 0.109 | 1.187–1.225 |
| 72223051 | Other bars and rods of stainless steel, containing by weight >= 2,5% of nickel, forged | 2 | 0.303 | 1.381–1.419 |
| 72223091 | Other bars and rods of stainless steel, containing by weight < 2,5% of nickel, forged | 2 | 0.303 | 1.381–1.419 |
| 72223097 | Bars and rods of stainless steel, cold-formed or cold-finished and further worked, or hot-formed and further worked, n.e.s. (excl. forged products) | 2 | 0.303 | 1.381–1.419 |
| 72224010 | Angles, shapes and sections of stainless steel, only hot-rolled, only hot-drawn or only extruded | 2 | 0.109 | 1.187–1.225 |
| 72224050 | Angles, shapes and sections of stainless steel, not further worked than cold-formed or cold-finished | 2 | 0.109 | 1.187–1.225 |
| 72224090 | Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. | 2 | 0.109 | 1.187–1.225 |
| 72230011 | Wire of stainless steel, in coils, containing by weight 28% to 31% nickel and 20% to 22% chromium (excl. bars and rods) | 2 | 0.109 | 1.187–1.225 |
| 72230019 | Wire of stainless steel, in coils, containing by weight >= 2,5% nickel (excl. such products containing 28% to 31% nickel and 20% to 22% chromium, and bars and rods) | 2 | 0.109 | 1.187–1.225 |
| 72230091 | Wire of stainless steel, in coils, containing by weight < 2,5% nickel, 13% to 25% chromium and 3,5% to 6% aluminium (excl. bars and rods) | 2 | 0.109 | 1.187–1.225 |
| 72230099 | Wire of stainless steel, in coils, containing by weight < 2,5% nickel (excl. such products containing 13% to 25% chromium and 3,5% to 6% aluminium, and bars and rods) | 2 | 0.109 | 1.187–1.225 |
| 72241010 | Ingots and other primary forms, of tool steel | 8 | 0.33–0.453 | 0.628–1.807 |
| 72241090 | Steel, alloy, other than stainless, in ingots or other primary forms (excl. of tool steel, waste and scrap in ingot form and products obtained by continuous casting) | 8 | 0.33–0.453 | 0.628–1.807 |
| 72249002 | Semi-finished products of tool steel | 8 | 0.1–0.223 | 0.397–1.577 |
| 72249003 | Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness | 8 | 0.1–0.223 | 0.397–1.577 |
| 72249005 | Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness | 8 | 0.1–0.223 | 0.397–1.577 |
| 72249007 | Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) | 8 | 0.1–0.223 | 0.397–1.577 |
| 72249014 | Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) | 8 | 0.1–0.223 | 0.397–1.577 |
| 72249018 | Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) | 8 | 0.33–0.453 | 0.628–1.807 |
| 72249031 | Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting | 8 | 0.1–0.223 | 0.397–1.577 |
| 72249038 | Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) | 8 | 0.1–0.223 | 0.397–1.577 |
| 72249090 | Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) | 8 | 0.33–0.453 | 0.628–1.807 |
| 72251100 | Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented | 3 | 0.073 | 0.109–1.779 |
| 72251910 | Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled | 3 | 0.073 | 0.101–1.399 |
| 72251990 | Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented | 3 | 0.109 | 0.138–1.488 |
| 72253010 | Flat-rolled products of tool steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils | 8 | 0.073 | 0.397–1.577 |
| 72253030 | Flat-rolled products of high-speed steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils | 8 | 0.073 | 0.397–1.577 |
| 72253090 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of tool steel, high-speed steel or silicon-electrical steel) | 8 | 0.073 | 0.397–1.577 |
| 72254012 | Flat-rolled products of tool steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils | 8 | 0.073 | 0.397–1.577 |
| 72254015 | Flat-rolled products of high-speed steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils | 8 | 0.073 | 0.397–1.577 |
| 72254040 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) | 8 | 0.073 | 0.397–1.577 |
| 72254060 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) | 8 | 0.073 | 0.397–1.577 |
| 72254090 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) | 8 | 0.073 | 0.397–1.577 |
| 72255020 | Flat-rolled products of high-speed steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" | 8 | 0.109 | 0.446–1.673 |
| 72255080 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) | 8 | 0.109 | 0.446–1.673 |
| 72259100 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) | 8 | 0.142 | 0.48–1.706 |
| 72259200 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) | 8 | 0.142 | 0.48–1.706 |
| 72259900 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) | 8 | 0.142 | 0.48–1.706 |
| 72261100 | Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented | 3 | 0.073 | 0.109–1.779 |
| 72261910 | Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled | 3 | 0.073 | 0.101–1.399 |
| 72261980 | Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented | 3 | 0.109 | 0.138–1.488 |
| 72262000 | Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" | 8 | 0.073 | 0.397–1.577 |
| 72269120 | Flat-rolled products of tool steel, of a width of < 600 mm, simply hot-rolled | 8 | 0.073 | 0.397–1.577 |
| 72269191 | Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of >= 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel) | 8 | 0.073 | 0.397–1.577 |
| 72269199 | Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of < 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel) | 8 | 0.073 | 0.397–1.577 |
| 72269200 | Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) | 8 | 0.109 | 0.446–1.673 |
| 72269910 | Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of high-speed steel or silicon-electrical steel) | 8 | 0.142 | 0.48–1.706 |
| 72269930 | Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated, and products of high-speed steel or silicon-electrical steel) | 8 | 0.142 | 0.48–1.706 |
| 72269970 | Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc, and products of high-speed steel or silicon-electrical steel) | 8 | 0.142 | 0.48–1.706 |
| 72271000 | Bars and rods of high-speed steel, hot-rolled, in irregularly wound coils | 8 | 0.109 | 0.433–1.613 |
| 72272000 | Bars and rods of silico-manganese steel, hot-rolled, in irregularly wound coils | 8 | 0.109 | 0.433–1.613 |
| 72279010 | Bars and rods, hot-rolled, of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to this chapter, in irregularly wound coils | 3 | 0.109 | 0.137–1.435 |
| 72279050 | Bars and rods, hot-rolled, of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5 of molybdenum, in irregularly wound coils | 3 | 0.109 | 0.137–1.435 |
| 72279095 | Bars and rods, hot-rolled, in irregularly wound coils of alloy steel other than stainless (excl. of high-speed steel or silico-manganese steel and bars and rods of subheadings 7227.90.10 and 7227.90.50) | 8 | 0.109 | 0.433–1.613 |
| 72281020 | Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72281050 | Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.303 | 0.628–1.807 |
| 72281090 | Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72282010 | Bars and rods of silico-manganese steel, of rectangular "other than square" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72282091 | Bars and rods of silico-manganese steel, of square or other than rectangular cross-section, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72282099 | Bars and rods of silico-manganese stee, of square or other than rectangular cross-section, only cold-formed or cold-finished, incl. further worked, or hot-rolled and further worked (excl. hot-rolled, hot drawn or extruded, not further worked than clad, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72283020 | Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72283041 | Bars and rods of steel containing by weight 0,9 to 1,15% of carbon and 0,5 to 2% of chromium, and, if present, <= 0,5% of molybdenum, only hot-rolled, hot-drawn or hot-extruded, of a circular cross-section of a diameter of >= 80 mm (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 3 | 0.109 | 0.137–1.435 |
| 72283049 | Bars and rods of steel containing by weight 0,9 to 1,15% of carbon and 0,5 to 2% of chromium, and, if present, <= 0,5% of molybdenum, only hot-rolled, only hot-drawn or hot-extruded (other than of circular cross-section, of a diameter of >= 80 mm and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 3 | 0.109 | 0.137–1.435 |
| 72283061 | Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of >= 80 mm (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72283069 | Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72283070 | Bars and rods of alloy steel other than stainless steel, of rectangular "other than square" cross-section, hot-rolled on four faces (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72283089 | Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of other than rectangular [other than square] cross-section, rolled on four faces, or of circular cross-section (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72284010 | Bars and rods of tool steel, only forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.303 | 0.628–1.807 |
| 72284090 | Bars and rods of alloy steel, other than stainless steel, only forged (excl. of high-speed steel, silico-manganese steel, tool steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.303 | 0.628–1.807 |
| 72285020 | Bars and rods of tool steel, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72285040 | Bars and rods of steel containing 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present <= 0,5% of molybdenum, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 3 | 0.109 | 0.137–1.435 |
| 72285061 | Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of >= 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72285069 | Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72285080 | Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished (excl. of circular cross-section and products of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72286020 | Bars and rods of tool steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72286080 | Bars and rods of alloy steel, other than stainless steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excl. bars and rods of high-speed steel, silico-manganese steel or tool steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 8 | 0.109 | 0.433–1.613 |
| 72287010 | Angles, shapes and sections of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded | 8 | 0.109 | 0.433–1.613 |
| 72287090 | Angles, shapes and sections of alloy steel other than stainless, n.e.s. (excl. products not further worked than hot-rolled, hot-drawn or extruded) | 8 | 0.109 | 0.433–1.613 |
| 72288000 | Hollow drill bars and rods, of alloy or non-alloy steel | 8 | 0.109 | 0.433–1.613 |
| 72292000 | Wire of silico-manganese steel, in coils (excl. bars and rods) | 8 | 0.109 | 0.433–1.613 |
| 72299020 | Wire of high-speed steel, in coils (excl. bars and rods) | 8 | 0.109 | 0.433–1.613 |
| 72299050 | Wire of steel containing by weight 0,9% to 1,1% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, in coils (excl. rolled bars and rods) | 3 | 0.109 | 0.137–1.435 |
| 72299090 | Wire of alloy steel other than stainless, in coils (excl. rolled bars and rods, wire of high-speed steel or silico-manganese steel and articles of subheading 7229.90.50) | 8 | 0.109 | 0.433–1.613 |
| 73011000 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements | 3 | 0.079 | 0.108–1.458 |
| 73012000 | Angles, shapes and sections, of iron or steel, welded | 3 | 0.079 | 0.108–1.458 |
| 73021010 | Current-conducting rails of iron or steel, with parts of non-ferrous metal, for railway or tramway track (excl. check-rails) | 3 | 0.057 | 0.085–1.383 |
| 73021022 | Vignole rails of iron or steel, for railway or tramway track, new, of a weight of >= 36 kg/m | 3 | 0.057 | 0.085–1.383 |
| 73021028 | Vignole rails of iron or steel, for railway or tramway track, new, of a weight of < 36 kg/m | 3 | 0.057 | 0.085–1.383 |
| 73021040 | Grooved rails of iron or steel, for railway or tramway track, new | 3 | 0.057 | 0.085–1.383 |
| 73021050 | Rails of iron or steel, for railway or tramway track, new (excl. vignole rails, grooved rails, and current-conducting rails with parts of non-ferrous metal) | 3 | 0.057 | 0.085–1.383 |
| 73021090 | Rails of iron or steel, for railway or tramway track, used (excl. current-conducting rails with parts of non-ferrous metal) | 3 | 0.057 | 0.085–1.383 |
| 73023000 | Switch blades, crossing frogs, point rods and other crossing pieces, for railway or tramway track, of iron or steel | 3 | 0.057 | 0.085–1.383 |
| 73024000 | Fish-plates and sole plates of iron or steel, for railways or tramways | 3 | 0.057 | 0.085–1.383 |
| 73029000 | Sleepers "cross-ties", check-rails, rack rails, chairs, chair wedges, rail clips, bedplates and ties and other specialised material for the jointing or fixing of railway or tramway track, of iron or steel (excl. rails, switch blades, crossing frogs, point rods and other crossing pieces, and fish-plates and sole plates) | 3 | 0.057 | 0.085–1.383 |
| 73030010 | Tubes and pipes of a kind used in pressure systems, of cast iron | 1 | 0.163 | 1.484 |
| 73030090 | Tubes, pipes and hollow profiles, of cast iron (excl. products of a kind used in pressure systems) | 1 | 0.163 | 1.484 |
| 73041100 | Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel | 2 | 0.057 | 1.135–1.173 |
| 73041910 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of <= 168,3 mm (excl. products of stainless steel or of cast iron) | 3 | 0.057 | 0.085–1.383 |
| 73041930 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. products of stainless steel or of cast iron) | 3 | 0.057 | 0.085–1.383 |
| 73041990 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of > 406,4 mm (excl. products of stainless steel or of cast iron) | 3 | 0.057 | 0.085–1.383 |
| 73042200 | Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas | 2 | 0.057 | 1.135–1.173 |
| 73042300 | Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) | 3 | 0.057 | 0.085–1.383 |
| 73042400 | Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel | 2 | 0.057 | 1.135–1.173 |
| 73042910 | Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter <= 168,3 mm (excl. products of cast iron) | 3 | 0.057 | 0.085–1.383 |
| 73042930 | Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter > 168,3 mm, but <= 406,4 mm (excl. products of cast iron) | 3 | 0.057 | 0.085–1.383 |
| 73042990 | Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter > 406,4 mm (excl. products of cast iron) | 3 | 0.057 | 0.085–1.383 |
| 73043120 | Precision tubes, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) | 3 | 0.057 | 0.085–1.383 |
| 73043180 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas and precision tubes) | 3 | 0.057 | 0.085–1.383 |
| 73043950 | Threaded or threadable tubes "gas pipe", seamless, of iron or non-alloy steel (excl. of cast iron) | 3 | 0.057 | 0.085–1.383 |
| 73043982 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) | 3 | 0.057 | 0.085–1.383 |
| 73043983 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) | 3 | 0.057 | 0.085–1.383 |
| 73043988 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) | 3 | 0.057 | 0.085–1.383 |
| 73044100 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) | 2 | 0.057 | 1.135–1.173 |
| 73044983 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) | 2 | 0.057 | 1.135–1.173 |
| 73044985 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) | 2 | 0.057 | 1.135–1.173 |
| 73044989 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) | 2 | 0.057 | 1.135–1.173 |
| 73045110 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced", straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chromium, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of subheadings 7304 19 to 7304 29) | 8 | 0.057 | 0.381–1.561 |
| 73045181 | Precision tubes, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil and tubes, and pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chrome, whether or not containing by weight <= 0,5% molybdenum) | 8 | 0.057 | 0.381–1.561 |
| 73045189 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil, precision tubes, and , pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chrome, whether or not containing by weight <= 0,5% molybdenum) | 8 | 0.057 | 0.381–1.561 |
| 73045930 | Tubes, pipes and hollow profiles of alloy steel (excl. stainless), seamless, of circular cross-section (not cold-drawn or cold-rolled), straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chromium, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of subheadings 7304 19 to 7304 29) | 3 | 0.057 | 0.085–1.383 |
| 73045982 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) | 8 | 0.057 | 0.381–1.561 |
| 73045983 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) | 8 | 0.057 | 0.381–1.561 |
| 73045989 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) | 8 | 0.057 | 0.381–1.561 |
| 73049000 | Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) | 3 | 0.057 | 0.085–1.383 |
| 73051100 | Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally submerged arc welded | 3 | 0.079 | 0.108–1.458 |
| 73051200 | Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally arc welded (excl. products longitudinally submerged arc welded) | 3 | 0.079 | 0.108–1.458 |
| 73051900 | Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel (excl. products longitudinally arc welded) | 3 | 0.079 | 0.108–1.458 |
| 73052000 | Casing of a kind used in drilling for oil or gas, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel | 3 | 0.079 | 0.108–1.458 |
| 73053100 | Tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally welded (excl. products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) | 3 | 0.079 | 0.108–1.458 |
| 73053900 | Tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, welded (excl. products longitudinally welded or of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) | 3 | 0.079 | 0.108–1.458 |
| 73059000 | Tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel, welded (excl. welded products or products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) | 3 | 0.079 | 0.108–1.458 |
| 73061100 | Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm | 2 | 0.109 | 1.23–1.27 |
| 73061900 | Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) | 3 | 0.079 | 0.108–1.458 |
| 73062100 | Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm | 2 | 0.109 | 1.23–1.27 |
| 73062900 | Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) | 3 | 0.079 | 0.108–1.458 |
| 73063012 | Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" | 3 | 0.079 | 0.108–1.458 |
| 73063018 | Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) | 3 | 0.044 | 0.072–1.37 |
| 73063041 | Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc | 3 | 0.112 | 0.141–1.491 |
| 73063049 | Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) | 3 | 0.112 | 0.141–1.491 |
| 73063072 | Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) | 3 | 0.112 | 0.141–1.491 |
| 73063077 | Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") | 3 | 0.112 | 0.141–1.491 |
| 73063080 | Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") | 3 | 0.112 | 0.141–1.491 |
| 73064020 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) | 2 | 0.109 | 1.23–1.27 |
| 73064080 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) | 2 | 0.073 | 1.151–1.189 |
| 73065021 | Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" | 8 | 0.109 | 0.446–1.673 |
| 73065029 | Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) | 8 | 0.073 | 0.397–1.577 |
| 73065080 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) | 8 | 0.109 | 0.446–1.673 |
| 73066110 | Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel | 2 | 0.109 | 1.23–1.27 |
| 73066192 | Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm | 3 | 0.112 | 0.141–1.491 |
| 73066199 | Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm | 3 | 0.112 | 0.141–1.491 |
| 73066910 | Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) | 2 | 0.109 | 1.23–1.27 |
| 73066990 | Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) | 3 | 0.112 | 0.141–1.491 |
| 73069000 | Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) | 3 | 0.112 | 0.141–1.491 |
| 73071110 | Tube or pipe fittings of non-malleable cast iron, of a kind used in pressure systems | 1 | 0.163 | 1.409 |
| 73071190 | Tube or pipe fittings of non-malleable cast iron (excl. products of a kind used in pressure systems) | 1 | 0.163 | 1.409 |
| 73071910 | Tube or pipe fittings of cast iron (excl. of non-malleable) | 1 | 0.163 | 1.409 |
| 73071990 | Cast tube or pipe fittings of steel | 3 | 0.303 | 0.331–1.629 |
| 73072100 | Flanges of stainless steel (excl. cast products) | 2 | 0.057 | 1.135–1.173 |
| 73072210 | Sleeves, of stainless steel, threaded (excl. cast products) | 2 | 0.057 | 1.135–1.173 |
| 73072290 | Elbows and bends, of stainless steel, threaded (excl. cast products) | 2 | 0.057 | 1.135–1.173 |
| 73072310 | Butt welding elbows and bends of stainless steel (excl. cast products) | 2 | 0.057 | 1.135–1.173 |
| 73072390 | Butt welding tube or pipe fittings of stainless steel (excl. cast products and elbows and bends) | 2 | 0.057 | 1.135–1.173 |
| 73072910 | Threaded tube or pipe fittings of stainless steel (excl. cast products, flanges, elbows, bends and sleeves) | 2 | 0.057 | 1.135–1.173 |
| 73072980 | Tube or pipe fittings of stainless steel (excl. cast, threaded, butt welding fittings and flanges) | 2 | 0.057 | 1.135–1.173 |
| 73079100 | Flanges of iron or steel (excl. cast or stainless products) | 3 | 0.057 | 0.085–1.383 |
| 73079210 | Sleeves of iron or steel, threaded (excl. cast or of stainless steel) | 3 | 0.057 | 0.085–1.383 |
| 73079290 | Elbows and bends, of iron or steel, threaded (excl. cast or of stainless steel) | 3 | 0.057 | 0.085–1.383 |
| 73079311 | Butt welding elbows and bends, of iron or steel, with greatest external diameter <= 609,6 mm (excl. cast iron or stainless steel products) | 3 | 0.057 | 0.085–1.383 |
| 73079319 | Butt welding fittings of iron or steel, with greatest external diameter <= 609,6 mm (excl. cast iron or stainless steel products, elbows, bends and flanges) | 3 | 0.057 | 0.085–1.383 |
| 73079391 | Butt welding elbows and bends, of iron or steel, with greatest external diameter > 609,6 mm (excl. cast iron or stainless steel products) | 3 | 0.057 | 0.085–1.383 |
| 73079399 | Butt welding fittings of iron or steel, with greatest external diameter > 609,6 mm (excl. cast iron or stainless steel products, elbows, bends and flanges) | 3 | 0.057 | 0.085–1.383 |
| 73079910 | Threaded tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products, flanges, elbows, bends and sleeves) | 3 | 0.057 | 0.085–1.383 |
| 73079980 | Tube or pipe fittings, of iron or steel (excl. of cast iron or stainless steel, threaded, butt welding fittings, and flanges) | 3 | 0.057 | 0.085–1.383 |
| 73081000 | Bridges and bridge-sections, of iron or steel | 3 | 0.112 | 0.141–1.491 |
| 73082000 | Towers and lattice masts, of iron or steel | 3 | 0.112 | 0.141–1.491 |
| 73083000 | Doors, windows and their frames and thresholds for doors, of iron or steel | 3 | 0.112 | 0.141–1.491 |
| 73084000 | Equipment for scaffolding, shuttering, propping or pit-propping (excl. composite sheetpiling products and formwork panels for poured-in-place concrete, which have the characteristics of moulds) | 3 | 0.112 | 0.141–1.491 |
| 73089051 | Panels comprising two walls of profiled "ribbed" sheet, of iron or steel, with an insulating core | 3 | 0.112 | 0.141–1.491 |
| 73089059 | Structures and parts of structures, of iron or steel, solely or principally of sheet, n.e.s. (excl. doors and windows and their frames, and panels comprising two walls of profiled "ribbed" sheet, of iron or steel, with an insulating core) | 3 | 0.112 | 0.141–1.491 |
| 73089098 | Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) | 3 | 0.112 | 0.141–1.491 |
| 73090010 | Reservoirs, tanks, vats and similar containers, of iron or steel, for gases other than compressed or liquefied gas, of a capacity of > 300 l (excl. containers fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) | 3 | 0.112 | 0.141–1.491 |
| 73090030 | Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, lined or heat-insulated and of a capacity of > 300 l (excl. containers fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) | 3 | 0.112 | 0.141–1.491 |
| 73090051 | Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of > 100.000 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) | 3 | 0.112 | 0.141–1.491 |
| 73090059 | Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of <= 100.000 l but > 300 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) | 3 | 0.112 | 0.141–1.491 |
| 73090090 | Reservoirs, tanks, vats and similar containers, of iron or steel, for solids, of a capacity of > 300 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) | 3 | 0.112 | 0.141–1.491 |
| 73101000 | Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of >= 50 l but <= 300 l, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment) | 3 | 0.112 | 0.141–1.491 |
| 73102111 | Cans of iron or steel, of a capacity of < 50 l, which are to be closed by soldering or crimping, of a kind used for preserving food | 3 | 0.112 | 0.141–1.491 |
| 73102119 | Cans of iron or steel, of a capacity of < 50 l, which are to be closed by soldering or crimping, of a kind used for preserving drink | 3 | 0.112 | 0.141–1.491 |
| 73102191 | Cans of iron or steel, of a capacity of < 50 l, which are to be closed by soldering or crimping, of a wall thickness of < 0,5 mm (excl. cans for compressed or liquefied gas, and cans of a kind used for preserving food and drink) | 3 | 0.112 | 0.141–1.491 |
| 73102199 | Cans of iron or steel, of a capacity of < 50 l, which are to be closed by soldering or crimping, of a wall thickness of >= 0,5 mm (excl. cans for compressed or liquefied gas, and cans of a kind used for preserving food and drink) | 3 | 0.112 | 0.141–1.491 |
| 73102910 | Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of < 50 l and of a wall thickness of < 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping) | 3 | 0.112 | 0.141–1.491 |
| 73102990 | Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of < 50 l and of a wall thickness of >= 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping) | 3 | 0.112 | 0.141–1.491 |
| 73110011 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity < 20 l (excl. containers specifically constructed or equipped for one or more types of transport) | 3 | 0.038 | 0.066–1.364 |
| 73110013 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity >= 20 l to <= 50 l (excl. containers specifically constructed or equipped for one or more types of transport) | 3 | 0.038 | 0.066–1.364 |
| 73110019 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity > 50 l (excl. containers specifically constructed or equipped for one or more types of transport) | 3 | 0.038 | 0.066–1.364 |
| 73110030 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure < 165 bar (excl. containers specifically constructed or equipped for one or more types of transport) | 3 | 0.038 | 0.066–1.364 |
| 73110091 | Containers of iron or steel, seamless, for compressed or liquefied gas, of a capacity of < 1.000 l (excl. seamless containers and containers specifically constructed or equipped for one or more types of transport) | 3 | 0.038 | 0.066–1.364 |
| 73110099 | Containers of iron or steel, seamless, for compressed or liquefied gas, of a capacity of >= 1.000 l (excl. seamless containers and containers specifically constructed or equipped for one or more types of transport) | 3 | 0.038 | 0.066–1.364 |
| 73181100 | Coach screws of iron or steel | 3 | 0.038 | 0.066–1.364 |
| 73181210 | Wood screws of stainless steel (excl. coach screws) | 2 | 0.038 | 1.116–1.154 |
| 73181290 | Wood screws of iron or steel other than stainless (excl. coach screws) | 3 | 0.038 | 0.066–1.364 |
| 73181300 | Screw hooks and screw rings, of iron or steel | 3 | 0.038 | 0.066–1.364 |
| 73181410 | Self-tapping screws, of stainless steel (excl. wood screws) | 2 | 0.038 | 1.116–1.154 |
| 73181491 | Spaced-thread screws of iron or steel other than stainless | 3 | 0.038 | 0.066–1.364 |
| 73181499 | Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) | 3 | 0.038 | 0.066–1.364 |
| 73181520 | Screws and bolts, of iron or steel "whether or not with their nuts and washers", for fixing railway track construction material (excl. coach screws) | 3 | 0.038 | 0.066–1.364 |
| 73181535 | Screws and bolts, of stainless steel "whether or not with their nuts and washers", without heads (excl. screws and bolts for fixing railway track construction material) | 2 | 0.038 | 1.116–1.154 |
| 73181542 | Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of < 800 MPa (excl. screws and bolts for fixing railway track construction material) | 3 | 0.038 | 0.066–1.364 |
| 73181548 | Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of >= 800 MPa (excl. screws and bolts for fixing railway track construction material) | 3 | 0.038 | 0.066–1.364 |
| 73181552 | Screws and bolts, of stainless steel "whether or not with their nuts and washers", with slotted or cross-recessed heads (excl. wood screws and self-tapping screws) | 2 | 0.038 | 1.116–1.154 |
| 73181558 | Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with slotted or cross-recessed heads (excl. wood screws and self-tapping screws) | 3 | 0.038 | 0.066–1.364 |
| 73181562 | Hexagonal-socket head screws and bolts, of stainless steel "whether or not with their nuts and washers" (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) | 2 | 0.038 | 1.116–1.154 |
| 73181568 | Hexagonal-socket head screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers" (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) | 3 | 0.038 | 0.066–1.364 |
| 73181575 | Hexagon screws and bolts, of stainless steel "whether or not with their nuts and washers" (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) | 2 | 0.038 | 1.116–1.154 |
| 73181582 | Hexagon screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with a tensile strength of < 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) | 3 | 0.038 | 0.066–1.364 |
| 73181588 | Hexagon screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with a tensile strength of => 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) | 3 | 0.038 | 0.066–1.364 |
| 73181595 | Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings) | 3 | 0.038 | 0.066–1.364 |
| 73181631 | Blind rivet nuts of stainless steel | 2 | 0.038 | 1.116–1.154 |
| 73181639 | Nuts of stainless steel (excl. blind rivet nuts) | 2 | 0.038 | 1.116–1.154 |
| 73181640 | Blind rivet nuts of iron or steel other than stainless | 3 | 0.038 | 0.066–1.364 |
| 73181660 | Self-locking nuts of iron or steel other than stainless | 3 | 0.038 | 0.066–1.364 |
| 73181692 | Nuts of iron or steel other than stainless, with an inside diameter <= 12 mm (excl. blind rivet nuts and self-locking nuts) | 3 | 0.038 | 0.066–1.364 |
| 73181699 | Nuts of iron or steel other than stainless, with an inside diameter > 12 mm (excl. blind rivet nuts and self-locking nuts) | 3 | 0.038 | 0.066–1.364 |
| 73181900 | Threaded articles, of iron or steel, n.e.s. | 3 | 0.038 | 0.066–1.364 |
| 73182100 | Spring washers and other lock washers, of iron or steel | 3 | 0.038 | 0.066–1.364 |
| 73182200 | Washers of iron or steel (excl. spring washers and other lock washers) | 3 | 0.038 | 0.066–1.364 |
| 73182300 | Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) | 3 | 0.038 | 0.066–1.364 |
| 73182400 | Cotters and cotter pins, of iron or steel | 3 | 0.038 | 0.066–1.364 |
| 73182900 | Non-threaded articles, of iron or steel | 3 | 0.038 | 0.066–1.364 |
| 73261100 | Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked | 3 | 0.303 | 0.331–1.629 |
| 73261910 | Articles of iron or steel, open-die forged, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) | 3 | 0.303 | 0.331–1.629 |
| 73261990 | Articles of iron or steel, closed-die forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) | 3 | 0.303 | 0.331–1.629 |
| 73262000 | Articles of iron or steel wire, n.e.s. | 3 | 0.071 | 0.099–1.397 |
| 73269030 | Ladders and steps, of iron or steel | 3 | 0.038 | 0.066–1.364 |
| 73269040 | Pallets and similar platforms for handling goods, of iron or steel | 3 | 0.038 | 0.066–1.364 |
| 73269050 | Reels for cables, piping and the like, of iron or steel | 3 | 0.038 | 0.066–1.364 |
| 73269060 | Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel | 3 | 0.038 | 0.066–1.364 |
| 73269092 | Articles of iron or steel, open-die forged, n.e.s. | 3 | 0.303 | 0.331–1.629 |
| 73269094 | Articles of iron or steel, closed-die forged, n.e.s. | 3 | 0.303 | 0.331–1.629 |
| 73269096 | Sintered articles of iron or steel, n.e.s. | 3 | 0.303 | 0.331–1.629 |
| 73269098 | Articles of iron or steel, n.e.s. | 3 | 0.112 | 0.141–1.491 |
Column A applies where the importer uses the default methodology without opting for the alternative calculation route; ranges collapse to a single value when all routes share it.
Country-level default values (Annex I)
7365 rows cover 53 named origins plus the 'Other Countries and Territories' catch-all (6429 with a direct value, 28 with an indirect value, of 7365 rows). The full product-by-product matrix ships inside the European Commission workbooks linked below; this page keeps the sector-wide census plus the two Annex IV layers that drive most quotations.
Frequently asked questions
- What is the highest CBAM default value for iron and steel?
- Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented (CN 7225 11 00) carries the highest Annex IV default value for iron and steel at 13.24 tCO2e per tonne.
- How many benchmark routes exist for iron and steel?
- 478 CN8 products in the iron and steel part of Annex IV carry 1650 distinct production-route benchmark rows (column A and column B).
- Does the iron and steel country table include my origin?
- The iron and steel country-level table spans 53 named origins plus the 'Other Countries and Territories' catch-all; 6429 rows publish a direct-emission value and 28 rows publish an indirect (electricity) value.
Source: DV correcting act_final update_06.08.xlsx · CBAM Benchmarks_20260206.xlsx (retrieved 2026-10-20, EU-legislative-text licence, attribution: European Commission). Methodology and redistribution terms: Data Sources & Methodology. Figures are informational and not a binding customs ruling; verify with the linked authority before shipping.