← All trade remedy orders

Scope of the measure

The scope of the Orders covers certain on the road steel wheels, discs, and rims for tubeless tires, with a nominal rim diameter of 22.5 inches and 24.5 inches, regardless of width. Certain on-the-road steel wheels with a nominal wheel diameter of 22.5 inches and 24.5 inches are generally for Class 6, 7, and 8 commercial vehicles (as classified by the Federal Highway Administration Gross Vehicle Weight Rating system), including tractors, semi-trailers, dump trucks, garbage trucks, concrete mixers, and buses, and are the current standard wheel diameters for such applications. The standard widths of certain on-the- road steel wheels are 7.5 inches, 8.25 inches, and 9.0 inches, but all certain on-the-road steel wheels, regardless of width, are covered by the scope. While 22.5 inches and 24.5 inches are standard wheel sizes used by Class 6, 7, and 8 commercial vehicles, the scope covers sizes that may be adopted in the future for Class 6, 7, and 8 commercial vehicles. The scope includes certain on-the-road steel wheels with either a ``hub-piloted'' or ``stud- piloted'' mounting configuration, and includes rims and discs for such wheels, whether imported as an assembly or separately. The scope includes certain on the road steel wheels, discs, and rims, of carbon and/or alloy steel composition, whether cladded or not cladded, whether finished or not finished, and whether coated or uncoated. All on-the-road wheels sold in the United States are subject to the requirements of the National Highway Traffic Safety Administration and bear markings, such as the ``DOT'' symbol, indicating compliance with applicable motor vehicle standards. See 49 CFR 571.120. The scope includes certain on-the-road steel wheels imported with or without the required markings. Certain on-the-road steel wheels imported as an assembly with a tire mounted on the wheel and/or with a valve stem attached are included. However, if the certain on-the-road steel wheel is imported as an assembly with a tire mounted on the wheel and/or with a valve stem attached, the certain on-the-road steel wheel is covered by the scope, but the tire and/or valve stem is not covered by the scope. The scope includes rims and discs that have been further processed in a third country, including, but not limited to, the welding and painting of rims and discs from China to form a steel wheel, or any other processing that would not otherwise remove the merchandise from the scope of the proceeding if performed in China. Excluded from the scope are: (1) Steel wheels for tube-type tires that require a removable side ring; (2) Aluminum wheels; (3) Wheels where steel represents less than fifty percent of the product by weight; and (4) Steel wheels that do not meet National Highway Traffic Safety Administration requirements, other than the rim marking requirements found in 49 CFR 571.120S5.2. Imports of the subject merchandise are currently classified under the following Harmonized Tariff Schedule of the United States (HTSUS) subheadings: 8708.70.4530, 8708.70.4560, 8708.70.6030, 8708.70.6060, and 8716.90.5059. Merchandise meeting the scope description may also enter under the following HTSUS subheadings: 4011.20.1015, 4011.20.5020, and 8708.99.4850. While HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the Orders is dispositive. Continuation of the Orders As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to a continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act and 19 CFR 351.218(a), Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of these Orders is November 6, 2024. Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next sunset review of these Orders no later than 30 days prior to the fifth anniversary of the date of the last determination by the ITC. Administrative Protective Order (APO) This notice also serves as a final reminder to parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties These five-year sunset reviews and this notice are in accordance with section 751(c) and 751(d)(2) of the Act, and published pursuant to section 777(i)(1) of the Act and 19 CFR 351.218(f)(4). Dated: November 12, 2024.

Scope text quoted verbatim from the Federal Register notice. Scope text retrieved: 2026-10-19T16:17:45Z. Record last fetched: 2026-10-16T15:47:42Z. Verify against the official notice before relying on it.

HTS codes covered by this order

Related orders — same primary origin

• A-570-117 · Wood Mouldings and Millwork Products · AD+CVD concurrent · latest event 2026-10-15
• C-570-019 · Boltless Steel Shelving Units Prepackaged for Sale · AD+CVD concurrent · latest event 2026-10-14
• A-570-985 · Xanthan Gum · Antidumping (AD) · latest event 2026-10-14
• A-570-018 · Boltless Steel Shelving Units Prepackaged for Sale · AD+CVD concurrent · latest event 2026-10-14
• C-570-984 · Drawn Stainless Steel Sinks · AD+CVD concurrent · latest event 2026-10-06
• C-570-963 · Certain Potassium Phosphate Salts · AD+CVD concurrent · latest event 2026-10-05
• C-570-123 · Certain Corrosion Inhibitors · AD+CVD concurrent · latest event 2026-10-05
• A-570-962 · Certain Potassium Phosphate Salts · AD+CVD concurrent · latest event 2026-10-05

Quoting this shipment? Estimate its landed rate in the US tariff calculator, set up change alerts in a free ExportSonar account, or compare plan limits and pricing.