US AD/CVD order record · dataset entry, not legal advice.
Source: Federal Register · data retrieved 2026-10-16T16:03:21Z
The merchandise covered by these orders is aluminum common alloy sheet (common alloy sheet), which is a flat-rolled aluminum product having a thickness of 6.3 mm or less, but greater than 0.2 mm, in coils or cut-to-length, regardless of width. Common alloy sheet within the scope of the orders includes both not clad aluminum sheet, as well as multi-alloy, clad aluminum sheet. With respect to not clad aluminum sheet, common alloy sheet is manufactured from a 1XXX-, 3XXX-, or 5XXX-series alloy as designated by the Aluminum Association. With respect to multi-alloy, clad aluminum sheet, common alloy sheet is produced from a 3XXX-series core, to which cladding layers are applied to either one or both sides of the core. Common alloy sheet may be made to ASTM specification B209-14, but can also be made to other specifications. Regardless of specification, however, all common alloy sheet meeting the scope description is included in the scope. Subject merchandise includes common alloy sheet that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the orders if performed in the country of manufacture of the common alloy sheet. Excluded from the scope of the orders is aluminum can stock, which is suitable for use in the manufacture of aluminum beverage cans, lids of such cans, or tabs used to open such cans. Aluminum can stock is produced to gauges that range from 0.200 mm to 0.292 mm, and has an H- 19, H-41, H-48, or H-391 temper. In addition, aluminum can stock has a lubricant applied to the flat surfaces of the can stock to facilitate its manufacture of beverage cans. Aluminum can stock is properly classified under Harmonized Tariff Schedule of the United States (HTSUS) subheadings 7606.12.3045 and 7606.12.3055. Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set for the above. Common alloy sheet is currently classifiable under HTSUS subheadings 7606.11.3060, 7606.11.6000, 7606.12.3090, 7606.12.6000, 7606.91.3090, 7606.91.3095, 7606.91.6080, 7606.91.6095, 7606.92.3090, 7606.92.3035, 7606.92.6080, and 7606.92.6095. Further, merchandise that falls within the scope of the orders may also be entered into the United States under HTSUS subheadings 7606.11.3030, 7606.12.3015, 7606.12.3025, 7606.12.3030, 7606.12.3035, 7606.91.3055, 7606.91.3060, 7606.91.6040, 7606.91.6055, 7606.92.3025, 7606.92.3060, 7606.92.6040, 7606.92.6055, and 7607.11.9090. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the orders is dispositive. Filing Requirements All submissions to Commerce must be filed electronically via Enforcement and Compliance (E&C)'s Antidumping Duty and Countervailing Duty Centralized Electronic Service System (ACCESS), unless an exception applies. An electronically filed document must be received successfully in its entirety by the applicable deadline. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information. Each submission must be placed on the record of the segment of the proceeding for each order, i.e., for the AD order (A-570-073) and the CVD order (C-570-074). See Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011), as amended in Enforcement and Compliance; Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014) for details of Commerce's electronic filing requirements, effective August 5, 2011. Information on help using ACCESS can be found at https://access.trade.gov/help.aspx and a handbook can be found at https://access.trade.gov/help/Handbook%20on%20Electronic%20Filing%20Procedures.pdf . See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID-19, 85 FR 17006 (March 26, 2020); see also Temporary Rule Modifying AD/CVD Service Requirements Due to COVID19; Extension of Effective Period, 85 FR 41363 (July 10, 2020). Letters of Appearance and Administrative Protective Order Interested parties that wish to participate in these segments of the proceedings and to be added to the public service lists for these segments of the proceedings must file a letter of appearance in accordance with 19 CFR 351.103(d)(1), with one exception: The parties to EAPA investigation 7469 publicly identified by CBP in the covered merchandise referral referenced above (TKA and AA Metals) are not required to submit a letter of appearance, and will be added to the public service list for these segments of the proceedings by Commerce. See CBP's EAPA 7496 Letter at 5. Commerce placed an APO on the record on August 18, 2021, and established the APO service lists for use in these segments. Commerce intends to place the covered merchandise referral letter on the records of these segments in ACCESS within five days of publication of this notice. See Memorandum, ``Request for Establishment of Administrative Protective Order: Antidumping and Countervailing Duty Orders on Common Alloy Aluminum Sheet from the People's Republic of China: (A-570-073/C-570-074),'' dated August 18, 2021.
Scope text quoted verbatim from the Federal Register notice. Scope text retrieved: 2026-10-19T16:17:45Z. Record last fetched: 2026-10-16T16:03:21Z. Verify against the official notice before relying on it.
| HTSUS (dotted) | 8-digit | Description (USITC reference) |
|---|---|---|
| 7606.11.30 | 76061130 | Not clad |
| 7606.11.60 | 76061160 | Clad |
| 7606.12.30 | 76061230 | Not clad |
| 7606.12.60 | 76061260 | Clad |
| 7606.91.30 | 76069130 | Not clad |
| 7606.91.60 | 76069160 | Clad |
| 7606.92.30 | 76069230 | Not clad |
| 7606.92.60 | 76069260 | Clad |
| 7607.11.30 | 76071130 | Of a thickness not exceeding 0.01 mm |
| 7607.11.60 | 76071160 | Of a thickness exceeding 0.01 mm |
| 7607.11.90 | 76071190 | Other |
The scope text also references HS prefix(es) 760712 that we do not yet resolve against our USITC HTS reference table; they are shown verbatim instead of being guessed.
Quoting this shipment? Estimate its landed rate in the US tariff calculator, set up change alerts in a free ExportSonar account, or compare plan limits and pricing.
At a glance
The antidumping and countervailing measure covers Common Alloy Aluminum Sheet, imported from China. Case number C-570-074 is one of 540 active orders tracked in the database and was established 2021-08-25; the described product range determines which ten-digit lines inherit the cash-deposit obligation. Scope language in the Federal Register document controls.
As of dataset vintage 2026-10-16T16:09:24Z, yes: importers entering covered goods post a cash deposit at the current rate until Commerce's next administrative review publishes revised margins in the Federal Register. Deposit rates can change every review cycle, so confirm the latest Federal Register notice before you quote a figure to your customs broker.
These HTS headings are recorded in the case linkage: 7606.11.30, 7606.11.60, 7606.12.30, 7606.12.60, 7606.91.30, 7606.91.60, 7606.92.30, 7606.92.60, 7607.11.30, 7607.11.60, 7607.11.90. Confirm the exact ten-digit code against the published scope language, because product descriptions rather than codes alone define the legal boundary of the order, and scope rulings occasionally widen or narrow which lines inherit the deposit obligation.
Primary sources: Federal Register — C-570-074 · USITC Harmonized Tariff Schedule — republished with provenance by exportsonar.com