US AD/CVD order record · dataset entry, not legal advice.
Source: Federal Register · data retrieved 2026-10-16T15:58:47Z
This record carries the product short name (Certain Carbon and Alloy Steel Cut-To-Length Plate) but not the full legal scope paragraph. The controlling scope language — the products covered, exclusions, and geographic reach — is defined in the order's Federal Register notice.
Confirm coverage against the official scope paragraph in the linked Federal Register notice before relying on this record for classification decisions.
| HTSUS (dotted) | 8-digit | Description (USITC reference) |
|---|---|---|
| 7208.40.30 | 72084030 | Of a thickness of 4.75 mm or more |
| 7208.40.60 | 72084060 | Of a thickness of less than 4.75 mm |
| 7208.51.00 | 72085100 | Of a thickness exceeding 10 mm |
| 7208.52.00 | 72085200 | Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 7208.53.00 | 72085300 | Of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.90.00 | 72089000 | Other |
| 7210.70.30 | 72107030 | Not coated or plated with metal and not clad |
| 7210.70.60 | 72107060 | Other |
| 7210.90.10 | 72109010 | Clad |
| 7210.90.60 | 72109060 | Electrolytically coated or plated with base metal |
| 7210.90.90 | 72109090 | Other |
| 7211.13.00 | 72111300 | Universal mill plate |
| 7211.14.00 | 72111400 | Other, of a thickness of 4.75 mm or more |
| 7211.19.15 | 72111915 | Of high-strength steel |
| 7211.19.20 | 72111920 | Of a thickness exceeding 1.25 mm |
| 7211.19.30 | 72111930 | Other |
| 7211.19.45 | 72111945 | Of high-strength steel |
| 7211.19.60 | 72111960 | Pickled |
| 7211.19.75 | 72111975 | Other |
| 7211.90.00 | 72119000 | Other |
| 7212.40.10 | 72124010 | Of a width of less than 300 mm |
| 7212.40.50 | 72124050 | Other |
| 7212.50.00 | 72125000 | Otherwise plated or coated |
| 7214.10.00 | 72141000 | Forged |
| 7214.30.00 | 72143000 | Other, of free-cutting steel |
| 7214.91.00 | 72149100 | Of rectangular (other than square) cross-section |
| 7225.11.00 | 72251100 | Grain-oriented |
| 7225.19.00 | 72251900 | Other |
| 7225.40.11 | 72254011 | Of tool steel |
| 7225.40.30 | 72254030 | Other |
| 7225.40.51 | 72254051 | Of tool steel |
| 7225.40.70 | 72254070 | Other |
| 7225.99.00 | 72259900 | Other |
| 7226.11.10 | 72261110 | Of a width of 300 mm or more |
| 7226.11.90 | 72261190 | Of a width of less than 300 mm |
| 7226.19.10 | 72261910 | Of a width of 300 mm or more |
| 7226.19.90 | 72261990 | Of a width of less than 300 mm |
| 7226.20.00 | 72262000 | Of high-speed steel |
| 7226.91.05 | 72269105 | Of chipper knife steel |
| 7226.91.15 | 72269115 | Of a width of 300 mm or more |
| 7226.91.25 | 72269125 | Of a width of less than 300 mm |
| 7226.91.50 | 72269150 | Of a thickness of 4.75 mm or more |
| 7226.91.70 | 72269170 | Of a width of 300 mm or more |
| 7226.91.80 | 72269180 | Of a width of less than 300 mm |
| 7226.99.01 | 72269901 | Other |
Quoting this shipment? Estimate its landed rate in the US tariff calculator, set up change alerts in a free ExportSonar account, or compare plan limits and pricing.
At a glance
The countervailing measure covers Certain Carbon and Alloy Steel Cut-To-Length Plate, imported from China. Case number C-570-048 is one of 540 active orders tracked in the database and was established 2022-03-25; the described product range determines which ten-digit lines inherit the cash-deposit obligation. Scope language in the Federal Register document controls.
As of dataset vintage 2026-10-16T16:09:24Z, yes: importers entering covered goods post a cash deposit at the current rate until Commerce's next administrative review publishes revised margins in the Federal Register. Deposit rates can change every review cycle, so confirm the latest Federal Register notice before you quote a figure to your customs broker.
These HTS headings are recorded in the case linkage: 7208.40.30, 7208.40.60, 7208.51.00, 7208.52.00, 7208.53.00, 7208.90.00, 7210.70.30, 7210.70.60, 7210.90.10, 7210.90.60, 7210.90.90, 7211.13.00, 7211.14.00, 7211.19.15, 7211.19.20, 7211.19.30, 7211.19.45, 7211.19.60, 7211.19.75, 7211.90.00, 7212.40.10, 7212.40.50, 7212.50.00, 7214.10.00, 7214.30.00, 7214.91.00, 7225.11.00, 7225.19.00, 7225.40.11, 7225.40.30, 7225.40.51, 7225.40.70, 7225.99.00, 7226.11.10, 7226.11.90, 7226.19.10, 7226.19.90, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.91.50, 7226.91.70, 7226.91.80, 7226.99.01. Confirm the exact ten-digit code against the published scope language, because product descriptions rather than codes alone define the legal boundary of the order, and scope rulings occasionally widen or narrow which lines inherit the deposit obligation.
Primary sources: Federal Register — C-570-048 · USITC Harmonized Tariff Schedule — republished with provenance by exportsonar.com