US AD/CVD order record · dataset entry, not legal advice.
Source: Federal Register · data retrieved 2026-10-16T15:06:05Z
For the purposes of this Order, ``hot-rolled steel'' means certain hot-rolled flat-rolled carbon-quality steel products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers) regardless of thickness, and in straight lengths, of a thickness less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm but not exceeding 1250 mm and of a thickness of not less than 4 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of this Order. Specifically subject to the scope of this Order are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum. Steel products subject to the scope of this Order, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated: 1.80 Percent of manganese, or 1.50 percent of silicon, or 1.00 percent of copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of nickel, or 0.30 percent of tungsten, or 0.012 percent of boron, or 0.10 percent of molybdenum, or 0.10 percent of niobium, or 0.41 percent of titanium, or 0.15 percent of vanadium, or 0.15 percent of zirconium. All products that meet the physical and chemical description provided above are within the scope of this Order unless otherwise excluded. The following products, by way of example, are outside and/or specifically excluded from the scope of this Order: Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including e.g., ASTM specifications A543, A387, A514, A517, and A506). SAE/AISI grades of series 2300 and higher. Ball bearing steels, as defined in the HTSUS. Tool steels, as defined in the HTSUS. Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 1.50 percent. ASTM specifications A710 and A736. USS Abrasion-resistant steels (USS AR 400, USS AR 500). Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: C Mn P S Si Cr Cu Ni 0.10-0.14% 0.90% Max 0.025% Max 0.005% Max 0.30-0.50% 0.50-0.70% 0.20-0.40% 0.20% Max Width = 44.80 inches maximum; Thickness = 0.063-0.198 inches; Yield Strength = 50,000 ksi minimum; Tensile Strength = 70,000-88,000 psi. Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: C Mn P S Si Cr Cu Ni Mo 0.10-0.16% 0.70-0.90% 0.025% Max 0.006% Max 0.30-0.50% 0.50-0.70% 0.25% Max 0.20% Max 0.21% Max Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile Strength = 105,000 psi Aim. Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: C Mn P S Si Cr Cu Ni V(wt.) Cb 0.10-0.14% 1.30-1.80% 0.025% Max 0.005% Max 0.30-0.50% 0.50-0.70% 0.20-0.40% 0.20% Max 0.10% Max 0.08% Max Max Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile Strength = 105,000 psi Aim. Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: C Mn P S Si Cr Cu Ni Nb Ca Al 0.15% Max 1.40% Max 0.025% Max 0.010% Max 0.50% 1.00% Max 0.50% Max 0.20% Max 0.005% Max Treated 0.01-0.07% Width = 39.37 inches; Thickness = 0.181 inches maximum; Yield Strength = 70,000 psi minimum for thicknesses 0.148 inches; Tensile Strength = 80,000 psi minimum. Hot-rolled dual phase steel, phase-hardened, primarily with a ferritic-martensitic microstructure, contains 0.9 percent up to and including 1.5 percent silicon by weight, further characterized by either (i) tensile strength between 540 N/mm2 and 640 N/mm2 and an elongation percentage >=26 percent for thicknesses of 2mm and above, or (ii) a tensile strength between 590 N/mm2 and 690 N/mm2 and an elongation percentage 25 percent for thicknesses of 2mm and above.
Scope text quoted verbatim from the Federal Register notice. Scope text retrieved: 2026-10-19T16:17:45Z. Record last fetched: 2026-10-16T15:06:05Z. Verify against the official notice before relying on it.
| HTSUS (dotted) | 8-digit | Description (USITC reference) |
|---|---|---|
| 7208.10.15 | 72081015 | Pickled |
| 7208.10.30 | 72081030 | Of a thickness of 4.75 mm or more |
| 7208.10.60 | 72081060 | Of a thickness of less than 4.75 mm |
| 7208.25.30 | 72082530 | Of high-strength steel |
| 7208.25.60 | 72082560 | Other |
| 7208.26.00 | 72082600 | Of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.27.00 | 72082700 | Of a thickness of less than 3 mm |
| 7208.36.00 | 72083600 | Of a thickness exceeding 10 mm |
| 7208.37.00 | 72083700 | Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 7208.38.00 | 72083800 | Of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.39.00 | 72083900 | Of a thickness of less than 3 mm |
| 7208.40.30 | 72084030 | Of a thickness of 4.75 mm or more |
| 7208.40.60 | 72084060 | Of a thickness of less than 4.75 mm |
| 7208.53.00 | 72085300 | Of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.54.00 | 72085400 | Of a thickness of less than 3 mm |
| 7208.90.00 | 72089000 | Other |
Quoting this shipment? Estimate its landed rate in the US tariff calculator, set up change alerts in a free ExportSonar account, or compare plan limits and pricing.
At a glance
The antidumping measure covers Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products, imported from Russia. Case number A-821-809 is one of 540 active orders tracked in the database and was established 2021-12-22; the described product range determines which ten-digit lines inherit the cash-deposit obligation. Scope language in the Federal Register document controls.
As of dataset vintage 2026-10-16T16:09:24Z, yes: importers entering covered goods post a cash deposit at the current rate until Commerce's next administrative review publishes revised margins in the Federal Register. Deposit rates can change every review cycle, so confirm the latest Federal Register notice before you quote a figure to your customs broker.
These HTS headings are recorded in the case linkage: 7208.10.15, 7208.10.30, 7208.10.60, 7208.25.30, 7208.25.60, 7208.26.00, 7208.27.00, 7208.36.00, 7208.37.00, 7208.38.00, 7208.39.00, 7208.40.30, 7208.40.60, 7208.53.00, 7208.54.00, 7208.90.00. Confirm the exact ten-digit code against the published scope language, because product descriptions rather than codes alone define the legal boundary of the order, and scope rulings occasionally widen or narrow which lines inherit the deposit obligation.
Primary sources: Federal Register — A-821-809 · USITC Harmonized Tariff Schedule — republished with provenance by exportsonar.com