US AD/CVD order record · dataset entry, not legal advice.
Source: Federal Register · data retrieved 2026-10-16T14:35:24Z
The merchandise covered by the Order is tin mill products from Japan. For a complete description of the scope of the Order, see the appendix to this notice. Continuation of the Order As a result of the determinations by Commerce and the ITC that revocation of the Order would likely lead to continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Order. U.S. Customs and Border Protection will continue to collect AD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the Order will be May 31, 2024. Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next five-year review of the Order not later than 30 days prior to fifth anniversary of the date of the last determination by the ITC. Id. Administrative Protective Order (APO) This notice also serves as a final reminder to parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties This five-year (sunset) review and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and published in accordance with section 777(i) of the Act, and 19 CFR 351.218(f)(4). Dated: July 11, 2024. Abdelali Elouaradia, Deputy Assistant Secretary for Enforcement and Compliance. Appendix--Scope of the Order The scope of this Order includes tin mill flat-rolled products that are coated or plated with tin, chromium or chromium oxides. Flat-rolled steel products coated with tin are known as tin plate. Flat-rolled steel products coated with chromium or chromium oxides are known as tin-free steel or electrolytic chromium-coated steel. The scope includes all the noted tin mill products regardless of thickness, width, form (in coils or cut sheets), coating type (electrolytic or otherwise), edge (trimmed, untrimmed or further processed, such and scroll cut), coating thickness, surface finish, temper, coating metal (tin, chromium, chromium oxide), reduction (single- or double-reduced), and whether or not coated with a plastic material. All products that meet the written physical description are within the scope of the Order unless specifically excluded. The following products, by way of example, are outside and/or specifically excluded from the scope of the Order: Single reduced electrolytically chromium coated steel with a thickness 0.238 mm (85 pound base box) ( 10%) or 0.251 mm (90 pound base box) ( 10%) or 0.255 mm ( 10%) with 770 mm (minimum width) ( 1.588 mm) by 900 mm (maximum length if sheared) sheet size or 30.6875 inches (minimum width) ( \1/16\ inch) and 35.4 inches (maximum length if sheared) sheet size; with type MR or higher (per ASTM) A623 steel chemistry; batch annealed at T2 \1/2\ anneal temper, with a yield strength of 31 to 42 kpsi (214 to 290 Mpa); with a tensile strength of 43 to 58 kpsi (296 to 400 Mpa); with a chrome coating restricted to 32 to 150 mg/m ; with a chrome oxide coating restricted to 6 to 25 mg/m with a modified 7B ground roll finish or blasted roll finish; with roughness average (Ra) 0.10 to 0.35 micrometers, measured with a stylus instrument with a stylus radius of 2 to 5 microns, a trace length of 5.6 mm, and a cut-off of 0.8 mm, and the measurement traces shall be made perpendicular to the rolling direction; with an oil level of 0.17 to 0.37 grams/base box as type BSO, or 2.5 to 5.5 mg/m as type DOS, or 3.5 to 6.5 mg/m as type ATBC; with electrical conductivity of static probe voltage drop of 0.46 volts drop maximum, and with electrical conductivity degradation to 0.70 volts drop maximum after stoving (heating to 400 degrees F for 100 minutes followed by a cool to room temperature). Single reduced electrolytically chromium-or tin-coated steel in the gauges of 0.0040 inch nominal, 0.0045 inch nominal, 0.0050 inch nominal, 0.0061 inch nominal (55 pound base box weight), 0.0066 inch nominal (60 pound base box weight), and 0.0072 inch nominal (65 pound base box weight), regardless of width, temper, finish, coating or other properties. Single reduced electrolytically chromium coated steel in the gauge of 0.024 inch, with widths of 27.0 inches or 31.5 inches, and with T-1 temper properties.
Scope text quoted verbatim from the Federal Register notice. Scope text retrieved: 2026-10-19T16:17:45Z. Record last fetched: 2026-10-16T14:35:24Z. Verify against the official notice before relying on it.
| HTSUS (dotted) | 8-digit | Description (USITC reference) |
|---|---|---|
| 7210.11.00 | 72101100 | Of a thickness of 0.5 mm or more |
| 7210.12.00 | 72101200 | Of a thickness of less than 0.5 mm |
| 7210.50.00 | 72105000 | Plated or coated with chromium oxides or with chromium and chromium oxides |
| 7212.10.00 | 72121000 | Plated or coated with tin |
| 7212.50.00 | 72125000 | Otherwise plated or coated |
| 7225.99.00 | 72259900 | Other |
| 7226.99.01 | 72269901 | Other |
Quoting this shipment? Estimate its landed rate in the US tariff calculator, set up change alerts in a free ExportSonar account, or compare plan limits and pricing.
At a glance
The antidumping measure covers Certain Tin Mill Products, imported from Japan. Case number A-588-854 is one of 540 active orders tracked in the database and was established 2023-10-05; the described product range determines which ten-digit lines inherit the cash-deposit obligation. Scope language in the Federal Register document controls.
As of dataset vintage 2026-10-16T16:09:24Z, yes: importers entering covered goods post a cash deposit at the current rate until Commerce's next administrative review publishes revised margins in the Federal Register. Deposit rates can change every review cycle, so confirm the latest Federal Register notice before you quote a figure to your customs broker.
These HTS headings are recorded in the case linkage: 7210.11.00, 7210.12.00, 7210.50.00, 7212.10.00, 7212.50.00, 7225.99.00, 7226.99.01. Confirm the exact ten-digit code against the published scope language, because product descriptions rather than codes alone define the legal boundary of the order, and scope rulings occasionally widen or narrow which lines inherit the deposit obligation.
Primary sources: Federal Register — A-588-854 · USITC Harmonized Tariff Schedule — republished with provenance by exportsonar.com