US AD/CVD order record · dataset entry, not legal advice.
Source: Federal Register · data retrieved 2026-10-16T15:18:51Z
This record carries the product short name (Certain Hot-Rolled Steel Flat Products) but not the full legal scope paragraph. The controlling scope language — the products covered, exclusions, and geographic reach — is defined in the order's Federal Register notice.
Confirm coverage against the official scope paragraph in the linked Federal Register notice before relying on this record for classification decisions.
| HTSUS (dotted) | 8-digit | Description (USITC reference) |
|---|---|---|
| 7208.10.15 | 72081015 | Pickled |
| 7208.10.30 | 72081030 | Of a thickness of 4.75 mm or more |
| 7208.10.60 | 72081060 | Of a thickness of less than 4.75 mm |
| 7208.25.30 | 72082530 | Of high-strength steel |
| 7208.25.60 | 72082560 | Other |
| 7208.26.00 | 72082600 | Of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.27.00 | 72082700 | Of a thickness of less than 3 mm |
| 7208.36.00 | 72083600 | Of a thickness exceeding 10 mm |
| 7208.37.00 | 72083700 | Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 7208.40.30 | 72084030 | Of a thickness of 4.75 mm or more |
| 7208.40.60 | 72084060 | Of a thickness of less than 4.75 mm |
| 7208.51.00 | 72085100 | Of a thickness exceeding 10 mm |
| 7208.52.00 | 72085200 | Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 7208.53.00 | 72085300 | Of a thickness of 3 mm or more but less than 4.75 mm |
| 7208.90.00 | 72089000 | Other |
| 7209.15.00 | 72091500 | Of a thickness of 3 mm or more |
| 7209.16.00 | 72091600 | Of a thickness exceeding 1 mm but less than 3 mm |
| 7209.17.00 | 72091700 | Of a thickness of 0.5 mm or more but not exceeding 1 mm |
| 7209.18.15 | 72091815 | Of high-strength steel |
| 7209.18.25 | 72091825 | Of a thickness of less than 0.361 mm (blackplate) |
| 7209.18.60 | 72091860 | Other |
| 7210.30.00 | 72103000 | Electrolytically plated or coated with zinc |
| 7210.41.00 | 72104100 | Corrugated |
| 7210.49.00 | 72104900 | Other |
| 7210.61.00 | 72106100 | Plated or coated with aluminum-zinc alloys |
| 7210.69.00 | 72106900 | Other |
| 7210.70.30 | 72107030 | Not coated or plated with metal and not clad |
| 7210.70.60 | 72107060 | Other |
| 7210.90.10 | 72109010 | Clad |
| 7210.90.60 | 72109060 | Electrolytically coated or plated with base metal |
| 7210.90.90 | 72109090 | Other |
| 7211.13.00 | 72111300 | Universal mill plate |
| 7211.14.00 | 72111400 | Other, of a thickness of 4.75 mm or more |
| 7211.19.15 | 72111915 | Of high-strength steel |
| 7211.19.20 | 72111920 | Of a thickness exceeding 1.25 mm |
| 7211.19.30 | 72111930 | Other |
| 7211.19.45 | 72111945 | Of high-strength steel |
| 7211.19.60 | 72111960 | Pickled |
| 7211.19.75 | 72111975 | Other |
| 7211.90.00 | 72119000 | Other |
| 7212.40.10 | 72124010 | Of a width of less than 300 mm |
| 7212.40.50 | 72124050 | Other |
| 7212.50.00 | 72125000 | Otherwise plated or coated |
| 7213.91.30 | 72139130 | Not tempered, not treated and not partly manufactured |
| 7213.91.45 | 72139145 | Containing by weight 0.6 percent or more of carbon |
| 7213.91.60 | 72139160 | Other |
| 7213.99.00 | 72139900 | Other |
| 7214.91.00 | 72149100 | Of rectangular (other than square) cross-section |
| 7214.99.00 | 72149900 | Other |
| 7215.10.00 | 72151000 | Of free-cutting steel, not further worked than cold-formed or cold-finished |
| 7215.50.00 | 72155000 | Other, not further worked than cold-formed or cold-finished |
| 7215.90.10 | 72159010 | Not cold-formed |
| 7215.90.30 | 72159030 | Cold-formed |
| 7215.90.50 | 72159050 | Other |
| 7217.20.15 | 72172015 | Flat wire |
| 7217.20.30 | 72172030 | With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon |
| 7217.20.45 | 72172045 | Other |
| 7217.20.60 | 72172060 | Containing by weight less than 0.25 percent of carbon |
| 7217.20.75 | 72172075 | Other |
| 7217.30.15 | 72173015 | Flat wire |
| 7217.30.30 | 72173030 | With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon |
| 7217.30.45 | 72173045 | Other |
| 7217.30.60 | 72173060 | Containing by weight less than 0.25 percent of carbon |
| 7217.30.75 | 72173075 | Other |
| 7217.90.10 | 72179010 | Coated with plastics |
| 7217.90.50 | 72179050 | Other |
| 7225.19.00 | 72251900 | Other |
| 7225.40.11 | 72254011 | Of tool steel |
| 7225.40.30 | 72254030 | Other |
| 7225.40.51 | 72254051 | Of tool steel |
| 7225.40.70 | 72254070 | Other |
| 7225.50.11 | 72255011 | Of tool steel |
| 7225.50.60 | 72255060 | Of a thickness of 4.75 mm or more |
| 7225.50.70 | 72255070 | Heat-resisting steel |
| 7225.50.80 | 72255080 | Other |
| 7225.91.00 | 72259100 | Electrolytically plated or coated with zinc |
| 7225.92.00 | 72259200 | Otherwise plated or coated with zinc |
| 7225.99.00 | 72259900 | Other |
| 7226.11.10 | 72261110 | Of a width of 300 mm or more |
| 7226.11.90 | 72261190 | Of a width of less than 300 mm |
| 7226.19.10 | 72261910 | Of a width of 300 mm or more |
| 7226.19.90 | 72261990 | Of a width of less than 300 mm |
| 7226.20.00 | 72262000 | Of high-speed steel |
| 7226.91.05 | 72269105 | Of chipper knife steel |
| 7226.91.15 | 72269115 | Of a width of 300 mm or more |
| 7226.91.25 | 72269125 | Of a width of less than 300 mm |
| 7226.91.50 | 72269150 | Of a thickness of 4.75 mm or more |
| 7226.91.70 | 72269170 | Of a width of 300 mm or more |
| 7226.91.80 | 72269180 | Of a width of less than 300 mm |
| 7226.92.10 | 72269210 | Of a width of 300 mm or more |
| 7226.92.30 | 72269230 | Of a width of less than 300 mm |
| 7226.92.50 | 72269250 | Of a width of 300 mm or more |
| 7226.92.70 | 72269270 | Of a thickness not exceeding 0.25 mm |
| 7226.92.80 | 72269280 | Of a thickness exceeding 0.25 mm |
| 7226.99.01 | 72269901 | Other |
| 7227.20.00 | 72272000 | Of silico-manganese steel |
| 7227.90.10 | 72279010 | Not tempered, not treated, and not partly manufactured |
| 7227.90.20 | 72279020 | Other |
| 7227.90.60 | 72279060 | Other |
| 7228.60.10 | 72286010 | Of tool steel (other than high-speed steel) |
| 7228.60.60 | 72286060 | Not cold-formed |
| 7228.60.80 | 72286080 | Cold-formed |
| 7229.90.05 | 72299005 | Of high-speed steel |
| 7229.90.10 | 72299010 | Flat wire |
| 7229.90.50 | 72299050 | Round wire |
| 7229.90.90 | 72299090 | Other wire |
Quoting this shipment? Estimate its landed rate in the US tariff calculator, set up change alerts in a free ExportSonar account, or compare plan limits and pricing.
At a glance
The antidumping measure covers Certain Hot-Rolled Steel Flat Products, imported from Korea. Case number A-580-883 is one of 540 active orders tracked in the database and was established 2021-02-18; the described product range determines which ten-digit lines inherit the cash-deposit obligation. Scope language in the Federal Register document controls.
As of dataset vintage 2026-10-16T16:09:24Z, yes: importers entering covered goods post a cash deposit at the current rate until Commerce's next administrative review publishes revised margins in the Federal Register. Deposit rates can change every review cycle, so confirm the latest Federal Register notice before you quote a figure to your customs broker.
These HTS headings are recorded in the case linkage: 7208.10.15, 7208.10.30, 7208.10.60, 7208.25.30, 7208.25.60, 7208.26.00, 7208.27.00, 7208.36.00, 7208.37.00, 7208.40.30, 7208.40.60, 7208.51.00, 7208.52.00, 7208.53.00, 7208.90.00, 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.25, 7209.18.60, 7210.30.00, 7210.41.00, 7210.49.00, 7210.61.00, 7210.69.00, 7210.70.30, 7210.70.60, 7210.90.10, 7210.90.60, 7210.90.90, 7211.13.00, 7211.14.00, 7211.19.15, 7211.19.20, 7211.19.30, 7211.19.45, 7211.19.60, 7211.19.75, 7211.90.00, 7212.40.10, 7212.40.50, 7212.50.00, 7213.91.30, 7213.91.45, 7213.91.60, 7213.99.00, 7214.91.00, 7214.99.00, 7215.10.00, 7215.50.00, 7215.90.10, 7215.90.30, 7215.90.50, 7217.20.15, 7217.20.30, 7217.20.45, 7217.20.60, 7217.20.75, 7217.30.15, 7217.30.30, 7217.30.45, 7217.30.60, 7217.30.75, 7217.90.10, 7217.90.50, 7225.19.00, 7225.40.11, 7225.40.30, 7225.40.51, 7225.40.70, 7225.50.11, 7225.50.60, 7225.50.70, 7225.50.80, 7225.91.00, 7225.92.00, 7225.99.00, 7226.11.10, 7226.11.90, 7226.19.10, 7226.19.90, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.91.50, 7226.91.70, 7226.91.80, 7226.92.10, 7226.92.30, 7226.92.50, 7226.92.70, 7226.92.80, 7226.99.01, 7227.20.00, 7227.90.10, 7227.90.20, 7227.90.60, 7228.60.10, 7228.60.60, 7228.60.80, 7229.90.05, 7229.90.10, 7229.90.50, 7229.90.90. Confirm the exact ten-digit code against the published scope language, because product descriptions rather than codes alone define the legal boundary of the order, and scope rulings occasionally widen or narrow which lines inherit the deposit obligation.
Primary sources: Federal Register — A-580-883 · USITC Harmonized Tariff Schedule — republished with provenance by exportsonar.com