US AD/CVD order record · dataset entry, not legal advice.
Source: Federal Register · data retrieved 2026-10-16T14:13:07Z
The scope of the Orders covers certain on-the-road steel wheels, discs, and rims for tubeless tires with a nominal wheel diameter of 12 inches to 16.5 inches, regardless of width. Certain on-the-road steel wheels with a nominal wheel diameter of 12 inches to 16.5 inches within the scope are generally for road and highway trailers and other towable equipment, including, inter alia, utility trailers, cargo trailers, horse trailers, boat trailers, recreational trailers, and towable mobile homes. The standard widths of certain on-the-road steel wheels are 4 inches, 4.5 inches, 5 inches, 5.5 inches, 6 inches, and 6.5 inches, but all certain on-the road steel wheels, regardless of width, are covered by the scope. The scope includes rims and discs for certain on-the-road steel wheels, whether imported as an assembly, unassembled, or separately. The scope includes certain on-the-road steel wheels regardless of steel composition, whether cladded or not cladded, whether finished or not finished, and whether coated or uncoated. The scope also includes certain on-the-road steel wheels with discs in either a ``hub-piloted'' or ``stud-piloted'' mounting configuration, though the stud-piloted configuration is most common in the size range covered. All on-the-road wheels sold in the United States must meet Standard 110 or 120 of the National Highway Traffic Safety Administration's (NHTSA) Federal Motor Vehicle Safety Standards, which requires a rim marking, such as the ``DOT'' symbol, indicating compliance with applicable motor vehicle standards. See 49 CFR 571.110 and 571.120. The scope includes certain on-the-road steel wheels imported with or without NHTSA's required markings. Certain on-the-road steel wheels imported as an assembly with a tire mounted on the wheel and/or with a valve stem or rims imported as an assembly with a tire mounted on the rim and/or with a valve stem are included in the scope of these orders. However, if the steel wheels or rims are imported as an assembly with a tire mounted on the wheel or rim and/or with a valve stem attached, the tire and/or valve stem is not covered by the scope. The scope includes rims, discs, and wheels that have been further processed in a third country, including, but not limited to, the painting of wheels from China and the welding and painting of rims and discs from China to form a steel wheel, or any other processing that would not otherwise remove the merchandise from the scope of the orders if performed in China. Excluded from this scope are the following: (1) Steel wheels for use with tube-type tires; such tires use multi piece rims, which are two-piece and three-piece assemblies and require the use of an inner tube; (2) aluminum wheels; (3) certain on-the-road steel wheels that are coated entirely in chrome. This exclusion is limited to chrome wheels coated entirely in chrome and produced through a chromium electroplating process, and does not extend to wheels that have been finished with other processes, including, but not limited to, Physical Vapor Deposition (PVD); (4) steel wheels that do not meet Standard 110 or 120 of the NHTSA's requirements other than the rim marking requirements found in 49 CFR 571.110S4.4.2 and 571.120S5.2; (5) steel wheels that meet the following specifications: steel wheels with a nominal wheel diameter ranging from 15 inches to 16.5 inches, with a rim width of 8 inches or greater, and a wheel backspacing ranging from 3.75 inches to 5.5 inches; and (6) steel wheels with wire spokes. Certain on-the-road steel wheels subject to these orders are properly classifiable under the following category of the Harmonized Tariff Schedule of the United States (HTSUS): 8716.90.5035 which covers the exact product covered by the scope whether entered as an assembled wheel or in components. Certain on-the-road steel wheels entered with a tire mounted on them may be entered under HTSUS 8716.90.5059 (Trailers and semi-trailers; other vehicles, not mechanically propelled, parts, wheels, other, wheels with other tires) (a category that will be broader than what is covered by the scope). While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the subject merchandise is dispositive. Continuation of the Orders As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the Orders will be March 13, 2025.
Scope text quoted verbatim from the Federal Register notice. Scope text retrieved: 2026-10-19T16:17:45Z. Record last fetched: 2026-10-16T14:13:07Z. Verify against the official notice before relying on it.
| HTSUS (dotted) | 8-digit | Description (USITC reference) |
|---|---|---|
| 8716.90.10 | 87169010 | Parts of farm wagons and carts: |
| 8716.90.30 | 87169030 | Castors, other than those of heading 8302 |
| 8716.90.50 | 87169050 | Other |
Quoting this shipment? Estimate its landed rate in the US tariff calculator, set up change alerts in a free ExportSonar account, or compare plan limits and pricing.
At a glance
The antidumping and countervailing measure covers Certain Steel Wheels 12 to 16.5 Inches in Diameter, imported from China. Case number A-570-090 is one of 540 active orders tracked in the database and was established 2024-12-02; the described product range determines which ten-digit lines inherit the cash-deposit obligation. Scope language in the Federal Register document controls.
As of dataset vintage 2026-10-16T16:09:24Z, yes: importers entering covered goods post a cash deposit at the current rate until Commerce's next administrative review publishes revised margins in the Federal Register. Deposit rates can change every review cycle, so confirm the latest Federal Register notice before you quote a figure to your customs broker.
These HTS headings are recorded in the case linkage: 8716.90.10, 8716.90.30, 8716.90.50. Confirm the exact ten-digit code against the published scope language, because product descriptions rather than codes alone define the legal boundary of the order, and scope rulings occasionally widen or narrow which lines inherit the deposit obligation.
Primary sources: Federal Register — A-570-090 · USITC Harmonized Tariff Schedule — republished with provenance by exportsonar.com