US AD/CVD order record · dataset entry, not legal advice.
Source: Federal Register · data retrieved 2026-10-16T15:29:33Z
The merchandise covered by this order is carbon and alloy steel threaded rod from India. For a complete description of the scope of the order, see the appendix to this notice. Amendment to the Final Determination A ministerial error is defined as an error in addition, subtraction, or other arithmetic function, clerical error resulting from inaccurate copying, duplication, or the like, and any other similar type of unintentional error which the Secretary considers ministerial. See section 735(e) of the Act; and 19 CFR 351.224(f). Pursuant to sections 735(e) of the Act and 19 CFR 351.224(e) and (f), Commerce is amending the Final Determination to reflect the correction of a ministerial error in the final estimated weighted- average dumping margin calculated for Mangal Steel Enterprise Limited (Mangal). In addition, because Mangal's estimated weighted-average dumping margin forms the basis for the estimated weighted-average dumping margin determined for all other companies, we also are revising the all others margin. The amended estimated weighted-average dumping margins are listed in the ``Estimated Weighted-Average Dumping Margins'' section below. See Memorandum, ``Antidumping Duty Investigation of Carbon and Alloy Steel Threaded Rod from India--Ministerial Error Allegation in the Final Determination,'' dated March 16, 2020. Antidumping Duty Order On April 3, 2020, in accordance with section 735(d) of the Act, the ITC notified Commerce of its final determination in this investigation, in which it found that an industry in the United States is materially injured within the meaning of section 735(b)(1)(A)(i) of the Act by reason of LTFV imports of threaded rod from India. Therefore, in accordance with sections 735(c)(2) and 736 of the Act, Commerce is issuing this antidumping duty order. See ITC Letter. Because the ITC determined that imports of threaded rod from India are materially injuring a U.S. industry, unliquidated entries of such merchandise from India, entered or withdrawn from warehouse for consumption, are subject to the assessment of antidumping duties. Therefore, in accordance with section 736(a)(1) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to assess, upon further instruction by Commerce, antidumping duties equal to the amount by which the normal value of the merchandise exceeds the export price (or constructed export price) of the merchandise, for all relevant entries of threaded rod from China. Antidumping duties will be assessed on unliquidated entries of threaded rod from China entered, or withdrawn from warehouse, for consumption on or after September 25, 2019, the date of publication of the Preliminary Determination, but will not include entries occurring after the expiration of the provisional measures period and before publication of the ITC's final injury determination as further described below. See Carbon and Alloy Steel Threaded Rod from India: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures, 84 FR 50376 (September 25, 2019) (Preliminary Determination). Continuation of Suspension of Liquidation In accordance with section 736 of the Act, Commerce will instruct CBP to continue to suspend liquidation of threaded rod from India as described in the appendix to this notice which are entered, or withdrawn from warehouse, for consumption on or after the date of publication of the ITC's notice of final determination in the Federal Register. These instructions suspending liquidation will remain in effect until further notice. We will also instruct CBP to require cash deposits equal to the amount as indicated below. Accordingly, effective on the date of publication of the ITC's final affirmative injury determination, CBP will require, at the same time as importers would normally deposit estimated duties on this subject merchandise, a cash deposit equal to the cash deposit rates listed below. The all others rate applies to all producers or exporters not specifically listed. See section 736(a)(3) of the Act. Estimated Weighted-Average Dumping Margins The weighted-average dumping margins are as follows: Cash deposit Weighted- rate (adjusted average for export Exporter/producer dumping margin subsidy (percent) offset(s)) (percent) Daksh Fasteners 28.34 22.86 Mangal Steel Enterprise Limited 2.75 0.00 All Others 2.75 0.00 Provisional Measures Section 733(d) of the Act states that instructions issued pursuant to an affirmative preliminary determination may not remain in effect for more than four months, except where exporters representing a significant proportion of exports of the subject merchandise request Commerce to extend that four-month period to no more than six months. Because Mangal, accounting for a significant proportion of threaded rod from India, requested an extension of provisional measures, we extended the four-month period to six months in this proceeding. The period began on September 25, 2019 and ended on March 22, 2020. See Mangal's Letter, ``Antidumping Investigation of Carbon and Alloy Steel Threaded Rod from India: Request for Postponement of Final Determination,'' dated August 21, 2019.
Scope text quoted verbatim from the Federal Register notice. Scope text retrieved: 2026-10-19T16:17:45Z. Record last fetched: 2026-10-16T15:29:33Z. Verify against the official notice before relying on it.
| HTSUS (dotted) | 8-digit | Description (USITC reference) |
|---|---|---|
| 7318.15.20 | 73181520 | Bolts and bolts and their nuts or washers entered or exported in the same shipment |
| 7318.15.40 | 73181540 | Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws) |
| 7318.15.50 | 73181550 | Studs |
| 7318.15.60 | 73181560 | Having shanks or threads with a diameter of less than 6 mm |
| 7318.15.80 | 73181580 | Having shanks or threads with a diameter of 6 mm or more |
| 7318.19.00 | 73181900 | Other |
Quoting this shipment? Estimate its landed rate in the US tariff calculator, set up change alerts in a free ExportSonar account, or compare plan limits and pricing.
At a glance
The antidumping measure covers Carbon and Alloy Steel Threaded Rod, imported from India. Case number A-533-887 is one of 540 active orders tracked in the database and was established 2020-04-09; the described product range determines which ten-digit lines inherit the cash-deposit obligation. Scope language in the Federal Register document controls.
As of dataset vintage 2026-10-16T16:09:24Z, yes: importers entering covered goods post a cash deposit at the current rate until Commerce's next administrative review publishes revised margins in the Federal Register. Deposit rates can change every review cycle, so confirm the latest Federal Register notice before you quote a figure to your customs broker.
These HTS headings are recorded in the case linkage: 7318.15.20, 7318.15.40, 7318.15.50, 7318.15.60, 7318.15.80, 7318.19.00. Confirm the exact ten-digit code against the published scope language, because product descriptions rather than codes alone define the legal boundary of the order, and scope rulings occasionally widen or narrow which lines inherit the deposit obligation.
Primary sources: Federal Register — A-533-887 · USITC Harmonized Tariff Schedule — republished with provenance by exportsonar.com