US AD/CVD order record · dataset entry, not legal advice.
Source: Federal Register · data retrieved 2026-10-16T14:43:20Z
The products covered by this order is common alloy aluminum sheet, which is a flat-rolled aluminum product having a thickness of 6.3 mm or less, but greater than 0.2 mm, in coils or cut-to-length, regardless of width. Common alloy sheet within the scope of this order includes both not clad aluminum sheet, as well as multi-alloy, clad aluminum sheet. With respect to not clad aluminum sheet, common alloy sheet is manufactured from a 1XXX-, 3XXX-, or 5XXX-series alloy as designated by the Aluminum Association. With respect to multi-alloy, clad aluminum sheet, common alloy sheet is produced from a 3XXX-series core, to which cladding layers are applied to either one or both sides of the core. The use of a proprietary alloy or non-proprietary alloy that is not specifically registered by the Aluminum Association as a discrete 1XXX- , 3XXX-, or 5XXX-series alloy, but that otherwise has a chemistry that is consistent with these designations, does not remove an otherwise in- scope product from the scope. Common alloy sheet may be made to ASTM specification B209-14 but can also be made to other specifications. Regardless of specification, however, all common alloy sheet meeting the scope description is included in the scope. Subject merchandise includes common alloy sheet that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of this order if performed in the country of manufacture of the common alloy sheet. Excluded from the scope of this order is aluminum can stock, which is suitable for use in the manufacture of aluminum beverage cans, lids of such cans, or tabs used to open such cans. Aluminum can stock is produced to gauges that range from 0.200 mm to 0.292 mm, and has an H- 19, H-41, H-48, H-39, or H-391 temper. In addition, aluminum can stock has a lubricant applied to the flat surfaces of the can stock to facilitate its movement through machines used in the manufacture of beverage cans. Aluminum can stock is properly classified under Harmonized Tariff Schedule of the United States (HTSUS) subheadings 7606.12.3045 and 7606.12.3055. Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set for the above. Common alloy sheet is currently classifiable under HTSUS subheadings 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000, 7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095. Further, merchandise that falls within the scope of this order may also be entered into the United States under HTSUS subheadings 7606.11.3030, 7606.12.3015, 7606.12.3025, 7606.12.3035, 7606.12.3091, 7606.91.3055, 7606.91.6055, 7606.92.3025, 7606.92.6055, 7607.11.9090. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this order is dispositive. Proposed Partial Revocation of the CAAS AD Order on Germany Kodak proposes that the CAAS AD Order on Germany be revoked, in part, with respect to lithographic-grade aluminum sheet and that Commerce amend the scope to include the following language: Also excluded from the scope is lithographic-grade aluminum sheet.
Scope text quoted verbatim from the Federal Register notice. Scope text retrieved: 2026-10-19T16:17:45Z. Record last fetched: 2026-10-16T14:43:20Z. Verify against the official notice before relying on it.
| HTSUS (dotted) | 8-digit | Description (USITC reference) |
|---|---|---|
| 7606.11.30 | 76061130 | Not clad |
| 7606.11.60 | 76061160 | Clad |
| 7606.12.30 | 76061230 | Not clad |
| 7606.12.60 | 76061260 | Clad |
| 7606.91.30 | 76069130 | Not clad |
| 7606.91.60 | 76069160 | Clad |
| 7606.92.30 | 76069230 | Not clad |
| 7606.92.60 | 76069260 | Clad |
| 7607.11.30 | 76071130 | Of a thickness not exceeding 0.01 mm |
| 7607.11.60 | 76071160 | Of a thickness exceeding 0.01 mm |
| 7607.11.90 | 76071190 | Other |
Quoting this shipment? Estimate its landed rate in the US tariff calculator, set up change alerts in a free ExportSonar account, or compare plan limits and pricing.
At a glance
The antidumping measure covers Common Alloy Aluminum Sheet, imported from Germany. Case number A-428-849 is one of 540 active orders tracked in the database and was established 2023-07-31; the described product range determines which ten-digit lines inherit the cash-deposit obligation. Scope language in the Federal Register document controls.
As of dataset vintage 2026-10-16T16:09:24Z, yes: importers entering covered goods post a cash deposit at the current rate until Commerce's next administrative review publishes revised margins in the Federal Register. Deposit rates can change every review cycle, so confirm the latest Federal Register notice before you quote a figure to your customs broker.
These HTS headings are recorded in the case linkage: 7606.11.30, 7606.11.60, 7606.12.30, 7606.12.60, 7606.91.30, 7606.91.60, 7606.92.30, 7606.92.60, 7607.11.30, 7607.11.60, 7607.11.90. Confirm the exact ten-digit code against the published scope language, because product descriptions rather than codes alone define the legal boundary of the order, and scope rulings occasionally widen or narrow which lines inherit the deposit obligation.
Primary sources: Federal Register — A-428-849 · USITC Harmonized Tariff Schedule — republished with provenance by exportsonar.com