HS 8431 — Parts suitable for use solely or principally with the machinery of headings 8425 to 8430

Save the HTS lines under this heading to a free watchlist (5 codes, no card) and keep the figures you look up in one place.A free account covers this page; Pro adds 100-code watchlists and rate-change alerts.

Create a free account

Under HTS heading 8431, all 51 statistical lines carry a Free Column 1 general rate, i.e. 0% in that column, against a statutory Column 2 rate of 45% for non-normal-trade-relations origins, as of HTS 2026-11-06, published by the USITC, the official agency that maintains the schedule. A China-origin entry pays 37.5% to 50% on top of that on 51 of the 51 lines (Chapter 99).

Heading 8431 covers “Parts suitable for use solely or principally with the machinery of headings 8425 to 8430” under Chapter 84. Get an instant duty estimate:

Calculate duty for 8431

What is the US tariff rate for HS heading 8431? The 2026-11-06 schedule prices heading 8431 line by line: 8431.10.00 (Of machinery of heading 8425) at Free; 8431.49.90.94 (Other) at Free; and 49 further lines in the table below. Column 2 for non-normal-trade-relations origins runs from 35% to 45%.

How do I estimate duty for HS 8431? Duty equals entered value times the line's own Column 1 rate, plus any Chapter 99 trade-remedy surcharge: Column 1 is Free on every line here, so the Column 1 part of the bill is zero and the reporting units on 8431.10.00 still govern the entry. No line under 8431 carries a Column 1 rate above zero. For goods of China origin, 51 of these 51 lines carry an additional Chapter 99 duty of 37.5% to 50% on top of Column 1 — the per-line figure is in the rate table above.

Which HTS statistical lines sit under heading 8431? Heading 8431 holds 51 statistical lines in the HTS 2026-11-06 export, including 8431.10.00, 8431.10.00.10, 8431.10.00.90 and 48 more. All 51 are duty-free under Column 1 — 8431.10.00 (Of machinery of heading 8425); 8431.10.00.10 (Of machinery of subheading 8425.11 or 8425.19); 8431.10.00.90 (Other); 8431.20.00.00 (Of machinery of heading 8427), plus 47 more — so Column 1 adds nothing to the bill; the origin-dependent Chapter 99 duty is priced per line in the rate table. For goods of China origin, 51 of these 51 lines carry an additional Chapter 99 duty of 37.5% to 50% on top of Column 1 — the per-line figure is in the rate table above.

HS 8431 — US general imports

$888.9MAll countries, September 2026.

Source: U.S. Census Bureau, foreign-trade statistics — 2026-09, monthly general imports (GEN_VAL_MO), all countries, summed over the heading's HS6 lines. Census rows collected 2026-11-08T00:03:28Z.

HS6 lines under heading 8431 — US imports, September 2026

HS6ProductUS importsLeading origins (share)
843110PARTS OF WINCHES, CAPSTANS AND JACKS$24,506,227CANADA 23.06%CHINA 17.55%UNITED KINGDOM 7.34%+43 more
843120PTS OF FRK LFT TRKS & WORKS TRKS WITH LIFT OR HNDL$148,474,137CHINA 26.10%MEXICO 22.83%CANADA 8.91%+51 more
843131PARTS OF ELEVATORS, EXC CONT ACTION,SK HOIST,ESCAL$34,760,947MEXICO 20.21%CANADA 17.81%CHINA 17.47%+35 more
843139PARTS OF ELEVATORS AND CONVEYORS,NESOI$190,550,924MEXICO 18.13%CANADA 14.19%GERMANY 11.67%+57 more
843141BUCKETS, SHOVELS, GRABS AND GRIPS, NESOI$43,072,369MEXICO 45.97%CANADA 12.92%CHINA 12.40%+32 more
843142BULLDOZER OR ANGLEDOZER BLADES$8,478,528MEXICO 63.68%CANADA 14.04%BRAZIL 7.55%+12 more
843143PTS OF BORING,SINKNG MAC OF SUBHD 8430.41,8430.49$71,955,106CHINA 19.60%MEXICO 19.12%CANADA 19.11%+40 more
843149PARTS OF MACH OF HEADING 8426, 8429 OR 8430, NESOI$367,106,307CHINA 23.44%MEXICO 19.41%JAPAN 11.64%+54 more

Each line is that HS6 code’s own US general imports for 2026-09 (GEN_VAL_MO) from the U.S. Census Bureau. Shares are of the line’s own total and count individual countries only: Census publishes continent, APEC/ASEAN/OECD-style and "total for all countries" rollup rows in the same response, and adding those would count the same dollars two to five times over.

Leading suppliers of HS 8431 — September 2026

Where the goods under this code came from, by country of origin, from the Census monthly series (all countries, general imports). Each share is of the heading 8431’s own total, printed in the table footer:

Origin countryUS importsShare of total
MEXICO$186.3M20.96%
CHINA$175.1M19.70%
CANADA$105.0M11.81%
JAPAN$63.3M7.12%
GERMANY$54.5M6.13%
Total, all 73 countries$888.9M100.00%

Exact total, all 73 origin countries: $888,904,545 — the figure the shares above divide by.

The five countries above are the largest. The remaining 68 countries account for $304.7M (34.28% of the total) and are not printed here; the count and that amount are exact, and the complete country list is part of the Pro trade-flow API.

Percentages are rounded to two decimals, so they may not add to exactly 100%; the dollar amounts sum to the total in the table footer without rounding.

Source: U.S. Census Bureau, foreign-trade statistics — 2026-09, monthly general imports (GEN_VAL_MO). Shares are computed from individual-country rows only: Census publishes continent, APEC/ASEAN/OECD-style bloc and "total for all countries" rows in the same response, and adding those would count the same dollars two to five times over. Census rows collected 2026-11-08T00:03:28Z.

Need this rate on every quote, invoice and shipment?

ExportSonar Pro watches up to 100 of your own HS codes daily (a free account watches 5) and sends each change with its old rate, new rate and USITC source — $49/month. USDT (TRC20) accepted today; card checkout is on the way.

Get Pro via USDT compare Pro plans

US Tariff Rates — Heading 8431

Heading 8431 holds 51 HTS statistical lines in the 2026-11-06 USITC export: 8431.10.00 (Of machinery of heading 8425) at Free; 8431.49.90.94 (Other) at Free; and 49 further lines in the table below. Column 2 for non-normal-trade-relations origins runs from 35% to 45%; 51 lines duty-free. Duty estimates on this page are informational and not a binding customs ruling.

Data as of 2026-11-06 · Source: USITC

HTS lineDescriptionUnitGeneral (Col. 1)SpecialColumn 2Additional duty
(China, Ch. 99)
Total (China)
8431.10.00Of machinery of heading 8425—Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.10.00.10Of machinery of subheading 8425.11 or 8425.19No.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.10.00.90OtherNo.Free—35%+50%9903.88.01 + 9903.74.08 · U.S. note 20(b) · U.S. note 3850%
8431.20.00.00Of machinery of heading 8427No.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.31.00Of passenger or freight elevators other than continuous action, skip hoists or escalators—Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.31.00.20Of skip hoistsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.31.00.40Of escalatorsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.31.00.60OtherNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.39.00Other—Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.39.00.10Of elevators and conveyorsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.39.00.50Of oil and gas field machineryNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.39.00.70Of the woodland log handling equipment of statistical reporting number 8428.90.0310No.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.39.00.80OtherNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.41.00Buckets, shovels, grabs and grips—Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.41.00.20Shovel attachmentsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.41.00.40Clamshell (grappler) attachmentsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.41.00.60Dragline bucketsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.41.00.80OtherNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.42.00.00Bulldozer or angledozer bladesNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.43.40.00Of offshore oil and natural gas drilling and production platformsNo.Free—45%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.43.80Other—Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.43.80.20Tool joints, whether or not forgedNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.43.80.40Drill pipe fitted with tool jointsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.43.80.60OtherNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.43.80.90Of other boring or sinking machineryNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.10Of machinery of heading 8426—Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.10.10Of machinery of subheadings 8426.11, 8426.19 and 8426.30No.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.10.60Of mobile lifting frames, straddle carriers and works trucks fitted with a craneNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.10.70Of copper or copper alloysNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.10.80OtherNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90Other—Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.05Backhoe attachmentsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.10Front-end loader attachmentsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.15Rippers and rootersNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.20OtherNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.25Cast axle housingsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.32Of copper or copper alloysNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.34OtherNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.35Cast axle housingsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.36Road wheelsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.38Wheel and tire assembliesNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.39Of copper or copper alloysNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.41OtherNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.45Scraper bowls for scrapers of subheadings 8429.30 and 8430.69.01No.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.50Track linksNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.55Cast axle housingsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.81Steel forgingskgFree—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.84Road wheelsNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.90Wheel and tire assembliesNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.92Of copper or copper alloysNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%
8431.49.90.94OtherNo.Free—35%+37.5%9903.88.01 + 9903.05.31 · U.S. note 20(b) · U.S. note 5237.5%

Source: USITC Harmonized Tariff Schedule (hts.usitc.gov REST export), 2026-11-06 build. The table reproduces this heading's 51 rows verbatim, 8431.10.00 through 8431.49.90.94. “Special” lists 8431.10.00 through 8431.49.90.94's free-trade-program preferences (A+, AU, BH…). Verify against the current USITC schedule before entry.

“Additional duty (China, Ch. 99)” is the Chapter 99 additional duty a Chinese origin pays on top of the Column 1 rate, priced by the same composition the site's calculator uses at a declared value of $1,000 (built 2026-11-11). “Total (China)” adds the two. “n/a” means this build has no priced row for the line — it does not mean zero. Confirm the rate against the live USITC schedule before filing.

Need this rate for every shipment?

Up to 200 HTS lines in one POST with a live API key or a Pro plan, 10 rows per request without either, every field of the calculator answer back as JSON, and a credit balance in each response — $10 of credits, no subscription required.

Get $10 API credits or compare Pro plans
Turn every HS lookup into landed-cost certainty

Pro runs a daily rate check on 100 watched codes and keeps the change log as a CSV you can cite for $49/month. USDT (TRC20) accepted today; card checkout is on the way.

Get Pro via USDT compare Pro plans

Duty measures in force — Heading 8431

This heading's HTS lines are reached by the Chapter 99 measures listed below, aggregated from the current USITC Chapter 99 release. Each row names the Chapter 99 provision the duty is assessed under and the U.S. note that authorizes it. Counts are per measure and overlap — one line can carry several of them, so the column does not add up to the heading's line count. The duties stack: U.S. note 52(a) makes articles subject to these headings “also subject to any additional duty provided for in this subchapter”, and the Total (China) column of the rate table above prints the combined figure per line. U.S. note 52 also carves articles out of this charge (subdivisions (b)–(k)), and this page applies none of those carve-outs: qualifying is a fact about the goods or their origin rather than about the line, so a qualifying entry can pay less than the figures above. The Chapter 99 release states no effective date for these measures, so none is printed here — confirm the rate against the live USITC schedule before filing. USITC Chapter 99 release.

MeasureOriginAdditional dutyHTS lines affected
Section 301 (China)9903.88.01 · U.S. note 20(b)China25%51
Chapter 99 note family9903.05.31 · U.S. note 52China12.5%50
Chapter 99 note family9903.74.08 · U.S. note 38China25%1

Rate-change alerts for HS 8431

An amendment to 8431.10.00 (Of machinery of heading 8425) or to the 50 other lines here lands on this page with the next USITC export. Every recorded change for this heading is on the public alert feed below, no signup needed. Add the code to a free account and the changes on it appear in your own alert view for the last 30 days; Pro watches the whole watchlist, keeps the full history and emails each change to the address on your account.

Public change log, no account: /alerts/index.json (JSON) · /alerts/all.atom (Atom)

This form only saves your address. With scripts off, your browser posts to our subscription form, which sends one confirmation email.

Sources: USITC Harmonized Tariff Schedule — heading 8431 · U.S. Customs & Border Protection — CROSS rulings